Helios 60 sun awning system carbon poles
16Pages

{{requestButtons}}

Catalog excerpts

Helios 60 sun awning system carbon poles - 3

Sun Awning Poles System Featuring high-tech carbon fiber construction and fantastic glossy finishing, Exit Carbon’s sun awning poles come in a variety of lengths and diameters to perfectly match your stern or bow deck. Designed for use on motor and sailing yachts, these poles are extremely light-weight, easy to set up, and stow anywhere with wall clips. TECHNICAL DATA HEIGHT FROM DECK AWNING SURFACE ©Exit Engineeri

Open the catalog to page 3
Helios 60 sun awning system carbon poles - 4

Sun Awning Poles combine strength and beauty HELIOS is a carbon sun awning system specially designed for sail and motor yachts. It consists in carbon fiber poles of different diameters, a set of female deck sockets, made both of stainless steel and aluminium, with different depths, thicknesses, flange diameters, and standing angles. Most sockets can be chosen with different fitting options (water drains, special bottom reinforcements, steel counter-flanges) to solve most installation problems. On request, in cooperation with MarineWerk, we can supply the awning, custom made with Serge Ferrari...

Open the catalog to page 4
Helios 60 sun awning system carbon poles - 5

Fit it where it’s most convenient, preserving your boat from excessive stress ✓ Determine the max load you will apply to the poles ✓ Carefully choose the most appropriate socket for your own yacht. adding the wind effect on the awning, and check on the next page which diameter is the right pole for you, choosing from 22 lengths (from 20 cm to 230 cm), four diameters (32 mm, 38 mm, 60 mm, 80 mm), and two angles (0° or 6°). As a rule of thumb, we suggest the following limits for our poles: A long pole will apply a very high concentrated load to the socket and this load will have to be safely...

Open the catalog to page 5
Helios 60 sun awning system carbon poles - 6

Sun Awning Poles combine strength and beauty ✓ Select how to attach your awning: a simple eye-bolt on top, if the tape has adjustable length, or with a Clamcleat® on the side with external or internal rope. On bigger models you can also control 2 ropes to connect 2 awnings to the same pole. ✓ How the rope works: the rope has a polymer ball on one end, and the awning has a tape loop. The loop has just enough slack for the ball to be pushed easily through with your hands, but when you tighten the rope, the ball is locked inside the loop. Then you can easily control the tension of the awning...

Open the catalog to page 6
Helios 60 sun awning system carbon poles - 7

MAX SIDE LOAD ON TOP OF THE POLE 32

Open the catalog to page 7
Helios 60 sun awning system carbon poles - 8

Female deck sockets Fittings Exit Carbon offers a large variety of female deck sockets. Flanges are 4 mm thick and quite wide, to distribute the load on a bigger deck surface. The 190mm deep models are the standard socket for this pole, either vertical or with a 6° angle. We provide also shorter variants, when it’s impractical to install a deeper socket, but we don’t advise to use the shorter sockets for poles taller than 170cm. All sockets come with an impeccable highly-polished deck flange and are lined with a protective polymer sleeve. Notice: All sockets, except for the 90 mm deep ones...

Open the catalog to page 8
Helios 60 sun awning system carbon poles - 9

Deck sockets options Socket bottoms All sockets, except for the 90 mm deep ones (available for Helios 32 and Helios 38) , present a threaded hole in the bottom to drain water as a standard. The installation of optional features for the bottom of the sockets is possible in different variants. The configuration with drain tube allows to bring the drained water where needed. The socket can have a closed bottom with the bottom seal, or again it can be even more strongly connected to the deck with the threaded pin version, thought to be used with a lower bracing.. Special deep bracing threaded...

Open the catalog to page 9
Helios 60 sun awning system carbon poles - 10

Options Stainless steel backing flange Wall clips Carbon fabric finishing Simplify the fitting of the female deck sockets with this strong, stainless steel counter-flange with threaded holes. Instead of using nuts with wide washers to be individually tightened, awkwardly holding your key below deck, use this single counter-flange. It distributes the load better than the widest of washers but, most of all, once you fit the screws into their threaded holes, you won’t need to use any key below deck when tightening the screws. Just tighten the screws from the top and the counter-flange will stay...

Open the catalog to page 10
Helios 60 sun awning system carbon poles - 11

Options Paint The carbon fiber poles come in Exit Carbon’s signature carbon look, or a color of your choice, among the mixture of classic boating colors, and soft, modern tones we selected for you. You can also create a completely individual finishing, selecting any color from the whole RAL or Awlgrip palette. See Pricing page for details. Provide the best protection for your poles and yacht with our exclusive, light grey Exit Carbon weatherproof padded stow bag. All our bags feature resistant and comfortable handles, individual slots for each pole, shoulder straps, practical zips, and can be...

Open the catalog to page 11
Helios 60 sun awning system carbon poles - 12

Sun Awnings Poles with eye-bolt LENGTH AVAILABLE LENGTHS AND PRICES HELIOS 32 Special reinforcements on stressed sections and Clamcleat® fitting. No screws on carbon. Optional Clamcleat ® rope fitting, both internal and external Vertical or angled mount (see sockets options) High-gloss, UV resistant carbon fiber visible finishing with clearcoat Optional Carbon fabric finishing, with clearcoat (see options below) Extra lengths on request. Clamcleat® with rope running outside Clamcleat® with rope running inside Poles Padded S

Open the catalog to page 12
Helios 60 sun awning system carbon poles - 13

HELIOS Sockets and fittings 90 mm deep vertical stainless steel or black hard anodized aluminium female socket (1) 90 mm deep vertical stainless steel or black hard anodized aluminium female socket (1) 120 mm deep vertical stainless steel female socket 120 mm deep 6° angled stainless steel female socket 120 mm deep vertical stainless steel female socket 120 mm deep 6° angled stainless steel female socket 120 mm deep vertical stainless steel female socket 120 mm deep 6° angled stainless steel female socket 190 mm deep vertical stainless steel female socket 190 mm deep 6° angled stainless...

Open the catalog to page 13
Helios 60 sun awning system carbon poles - 14

HELIOS Accessories HELIOS finishing options Bottom seal for socket Drain tube fitting for socket Bottom screw for additional bracket for socket Carbon fabric + clearcoat H32/38 stainless steel backing flange (threaded) Matt UV Resistant Transparent Paint stainless steel backing flange (threaded) stainless steel backing flange (threaded) Choices of color Slate Grey - Whisper Grey - Platinum Grey - Silk Grey - Oyster White - Off White Snow White - Ochre Brown - Grey Beige Desert Sand - Pebble Grey - Majestic Blue Cobalt Blue- Aristo Blue - Navy Blue Royal Blue. For even more colors, ask a quote....

Open the catalog to page 14

All Exit Carbon catalogs and brochures

Archived catalogs