Watermakers 50-100 m3/day

Product catalog summary

Overview: The document provides technical specifications and features of watermakers with capacities of 50, 75, and 100 m³/day, designed to produce drinking water from seawater without chemicals. These units are suitable for commercial vessels, offshore rigs, accommodation platforms, larger resorts, communities, golf courses, and drilling platforms.

Specifications:

Capacity: 50, 75, or 100 m³/day at 25ºC seawater temperature and 35,000 ppm TDS.
Installed Motor Power: 30 kW for all models.
Consumed Power: 26.7 kW for all models.
Raw Water Flow: 10.2 m³/h for all models.
Membranes: 2 pcs for MT-50 T, 4 pcs for MT-75 T, 6 pcs for MT-100 T.
Dimensions (Width x Depth x Height): 3000 mm x 985 mm x 1747 mm.
Weight: Approximately 500 kg for MT-50 T, 600 kg for MT-75 T, 700 kg for MT-100 T.

Design Features: The design is optimized for simple service and maintenance. Drinking water quality is continuously monitored with a salinity meter.

Standard Equipment:

High pressure pump in Duplex stainless steel.
Continuous control of outgoing water quality via a salinity meter and dumping valve.
Automatic flushing after each stop via a carbon cartridge filter.
Low pressure switch before the high pressure pump.
Feed water particle filter (5 micron).
Feed water manometer and safety valves.
Flow meter for production flow.
All electrical equipment minimum IP54.

Optional Equipment:

Remote control.
pH increase and mineral material filter in stainless steel.
UV sterilizer.
Dosing equipment for chlorine, anti-scalant, chlorine removal.
Sand filters for pre-filtration, steel with thermoplastic coating.
Hand conductivity meter and pH meter.
CIP cleaning tank included.
Float switch in water reservoir for start and stop.

Contact Information: ENWA Sweden and ENWA Norway contact details are provided for further inquiries.

Catalog excerpts

Watermakers 50, 75 and 100 m3/day The Water maker produces drinking water from sea water without chemicals. The capacity is 50, 75 or 100 m³/day from seawater (25º C). The drinking water quality is continuously monitored with a salinity meter The design is optimized for simple service and maintenance. The unit is suitable for: • • • • • Commercial vessels Offshore rigs and accommodation platforms Larger resorts and communities Golf courses Drilling platforms

Open the catalog to page 1

Capacity m³/day Installed motor power (kW) Consumed power (kW) Raw water flow (m3/h) Membranes Width (mm) Depth (mm) Height (mm) Weight dry (kg ) MT-50 T 50 30 26,7 10,2 2 pcs 3000 985 1747 ~ 500 MT-75 T 75 30 26,7 10,2 4 pcs 3000 985 1747 ~ 600 MT-100T 100 30 26,7 10,2 6 pcs 3000 985 1747 ~ 700 The capacity is calculated at a sea water temperature at 25ºC and a TDS at 35000 ppm, the flow will be decreased with lower temperature. Standard • • • • • • • • • • • • Optional Equipment High pressure pump in Duplex stainless steel Continues control of the outgoing water quality, via a salinity meter...

Open the catalog to page 2

Watermakers 50-100 m3/day

Watermakers 50-100 m3/day

Catalog excerpts

All ENWA Sandnes catalogs and brochures

Archived catalogs