HT 940 ATIS
6Pages

‘storm survivor’ by Entel HT900 Series ATEX approved Intrinsically Safe, E Ex i b II C T3 Submersible Dependable Tough

Intrinsically Safe - Radios for use in the potentially explosive environments of oil and gas installations, such as tankers or drilling platforms, or in gas-laden atmospheres encountered by the emergency services must be designed and constructed to be totally safe. Compliance with the ATEX Directive is now a legal requirement in all European Union Member States. Only portable radios type approved to the ATEX Directive are regarded as intrinsically safe in EU/EFTA countries. Note:This also applies to mobile offshore units, and seagoing vessels that weigh less than 500 gross tonnes. Built In...

Europe's stringent ATEX Directive for intrinsically safe portables used in hazardous locations. E Approved in accordance with the European standards Ex Explosion proof equipment i Intrinsically Safe - the energy levels in the circuits cannot cause accidental detonation b Area classifications I, applying to II For use in areas where there is some risk of detonation grouping, including hydrogen and Area classification Zone I covers areas where the environment is occasionally hazardous Zone 2 covers areas where the environment is only rarely hazardous and then only for brief periods. In order...

HT900 ATEX approved accessories *CCA23 0 230 volt, trickle charger *CCA12 12 volt, trickle charger *CXW640 Antenna adaptor for external aerial connection These accessories must only be used outside hazardous area location For the latest range of accessories visit www.entel.co.uk will invalidate your ATEX intrinsically safe approval.

technical specifications General - HT940 RF power output As per HT920 / HT980 Frequency range Channels 156.000 to 163.275 MHz All currently allocated International, Private channels Operating voltage Temperature range Current drain: USA and Canadian channels, with the programmable option to limit available channels 36 (dealer programmable) 7.4v DC -20°C to +50°C IIB IIC Frequency range VHF Frequency range UHF F1 F2 F3 60mA 200mA 1500mA (high) 750mA (low) 15 hours (high) / 19 hours (low) Dimensions Weight 130mm(h) x 59mm(w) x 33mm(d) 296g (with battery and aerial) 500mW erp IIC 446.00625 to...