*mynauticexpo

B-15 Class Door

Product catalog summary

Technical Specifications
Fire Class: B-15
Thickness: 42 mm
Standard Width (Clear Opening): 700 mm
Standard Length (Clear Opening): 1900 mm
Manufacturable Length (Clear Opening): 800 x 1900 mm, 700 x 2000 mm
Surface Steel Sheet Thickness: 0.6 mm
Door Leaf Surface: PVC, GLV, SS
PVC Film: Certified for "low flame spread"
Insulation Materials: Mineral Wool - Rockwool from Denmark
Density of Rockwool: 130 kg/m³
Weight: ~59 kg/pc (700 x 1900 mm)
Application: Mounted to Class B-15 partition panel
Certificates: IMO Resolution A.754(18), Flag Authority (TC Maritime Undersecretary), Bureau Veritas, Turk Loydu, MED Marine Equipment Directive (EC)

Installation Procedures
Ensure panels have correct measurements and holes are aligned.
Measure frame middle and check alignment with upper and lower parts.
Check distance between door leaf and frame for regularity.
Fasten door leaf and ensure it operates correctly.
If all checks are satisfactory, mount counter frames.
Ensure tight connections between frame, counter frame, and panel.
Tack weld frame parts from lock-handle and hinged sides to deck.
Perform final checks to ensure door leaf operates well.
Mounting operations are completed.

Advantages
Fast and easy assembly.
Box-shaped door frames with electrostatic dry powder coating.
Standard length manufacturing with customizable dimensions.
PVC surface protected against dirt and scratching.
Three hinges prevent sagging.
Hinges made from stainless steel.
Locks protected inside box-shaped steel.
Rosettes are stainless steel.
Available in various colors.
Door leaf supported by a strong skeleton.
Ventilation grill available on standard models.

Catalog excerpts

Class B-15 Door It is used on Class B- 7 5 partition panels.

Open the catalog to page 1

Flag Authority (TC Maritime Undersecretary) Bureau Veritas Turk Loydu MED Marine Equipment Direct

Open the catalog to page 2

Assembling of Class B-15 Doors A-A Section ClearO enin DoorLeaf Deck Stee/ Counter Frame Assembling Rules Fasten door leaf and check it is working good conditions or not. Measure frame middle and check whether the same with below and upper parts. Please check again whether distance door leaf and door frame is regular or not. 20 mm welding height 3 pieces Check before door frames set square. Please check whether panels aut correct measurement and hole in panels is in the straight plane. Put door frame to hole in panel. Tack weld below and upper parts of frame from hinged side to deck. Tack weld...

Open the catalog to page 3

Advantages ofClass B-15 Doors Fast and easy assembling. Door frames are box shaped profile and coated with e/ectrostatic dry powder painting. Locks are protected inside with box shaped stee/. Standart length manufacturing. Available to produce required dimensions. PVC surface are covered with a protective film against dirtyand straching. No hanging down. Three hinges. Hinges are produces from stainless steel materia/s and uniqe part. Plentyof color choice. Door leaf supported strong skelton. rosettes are completely stainless steel. n----ıııfl Hinges areas are supported from inside of door frame....

Open the catalog to page 4

B-15 Class Door

B-15 Class Door

Catalog excerpts

All Ensar Gemi ve Yan Sanayi A. Ş. catalogs and brochures