Portable Gauging & Sampling Solutions Product Overview for Marine Applications

CLOSED ELECTRONIC GAUGE RESTRICTED ELECTRONIC GAUGE SAMPLING EQUIPMENT • VAPOUR LOCK VALVES • PORTABLE Digital Thermometer + SERVICE Station NETwORK *

Honeywell Tanksystem is the world’s leading supplier of portable level gauging and sampling equipment for marine applications as well as for the oil and petrochemical industry. As an ISO 9001 certified company, we are dedicated to fulfilling the needs of customers who operate in classified areas according to high standards regarding safety, reliability and accuracy. We help you to protect the operator and the environment. Our main product lines are: • HERMetic portable level gauging equipment, an important tool for inventory control, cargo inspection during custody transfer and verification or...

Measurement accuracy is essential for the sale, purchase and handling of petroleum products. It reduces the likelihood of disputes between buyer and seller and facilitates control of losses. Accurate measurement demands the use of standard equipment and procedures. Although automatic level gauging systems are in widespread use in the petroleum industry for the measurement of petroleum liquids in storage tanks, manual tank gauging is still widely applied as the normal technique for level measurement in non-pressurized and vapour tight tanks. It is highly accurate provided the correct procedures...

HERMetic portable tank measuring system for marine applications Restricted operations Closed / Gas tight operations Sampler GT-1 Sampler GT or GT Chem UTImeter Rtex UTImeter Gtex Vapour Ullage Oil/water interface Sludge/Sediments

COMPLIANCE RULES Equipment type TYPICAL ARRANGEMENT OF VALVES VLCC, crude oil or oil/chemical tanker » 2 Inch ball valves for gauging and sampling access Product or chemical tanker ©> IMO Solas 74 MARPOL 73/78 ©> ISO 4512 3170 4268 0> API MPMS Chap 3.1A MPMS Chap 7 MPMS Chap 8.1 MPMS Chap 17.11 ©> IP PMM Part III-1 ©> PMM Part IV

The HERMetic UTImeter Gtex is a portable gas tight liquid level gauge designed for closed gauging of hydrocarbons and chemicals. The unit is used for custody transfer, inventory control measurement and free water detection on marine vessels and shore tanks. Connected to a HERMetic vapour control valve fixed on the tank, the HERMetic UTImeter Gtex avoids any gas release during operation. The unit enables 3, optionally 4 measurements in one single operation: • Ullage • Temperature • Oil-Water interface level • Innage, Reference height (Visc version) A GAUGE IN DIFFERENT VERSIONS DEDICATED TO YOUR...

ULTRA sensing probe Benefits: • 100 % repeatability of measures. • Continuous temperature reading. • High accuracy and stability. • Chemically resistant to corrosive liquids (Chem version). • Easy access for battery exchange. • Sensor exchange without need of new calibration. • Low weight for easy operation and carry around. • No temperature drift. No degradation of the sensitivity due to sensor ageing. • Interchangeable adapters for connection to different vapour control valves. • Tape cleaning devices, window wiper and tape protection on all units as standard. Low maintenance cost: Fully modular...

Buzzer on/off button LCD display with backlight Window wiper as standard on all UTImeter Gtex Level reading on graduated tape through window Easy access to the tape allows fast cleaning. No screws, only five easy to open lid fastener Tape cleaning device as standard on all UTImeter Tape protection tube Technical Specifications: ± 2 mm (± 0.08” approx.) Audible and Visible selectable 0,3 bar (4,4 psi) 15 m/50 ft, 30 m/100 ft, 35 m/115 ft Metric/English 1 mm / 1/16” ± 1.5 mm/30 m (±1/16”/100 ft approx.) requirements ± 0.1°C (0°C to 70°C); ± 0.2°F (32°F to 158°F) -20°C to 50°C / (-4°F to 122°F)...

All HERMetic UTImeters are now equipped with the sensor “ ULTRA “ for use in low and high viscous liquids. The ULTRA sensing probe consists of a stainless steel tube terminated by a PEEK head. The sensing probe includes an ultrasonic liquid level sensor, a temperature sensor and a conductivity electrode. The sensitivity for ullage and interface measurement does not require any adjustment. The sensor is calibrated once at the factory and does not require subsequent calibration. The temperature transducer is a RTD element. The characteristics of the RTD element are stored inside the sensor. The...

HERMetic UTImeter Rtex The HERMetic UTImeter Rtex is a portable liquid level gauge designed for restricted gauging of petroleum products. The unit is used for custody transfer, inventory control measurement and free water detection on marine vessels and shore tanks. The HERMetic UTImeter Rtex has to be connected to a HERMetic vapour control valve fixed on the tank. The unit enables 3, optionally 4 measurements in one single operation: • Ullage • Temperature • Oil-Water interface level • Innage, Reference height (Visc version) A gauge dedicated to your application: HERMetic UTImeter Rtex • ith...

All HERMetic UTImeters are now equipped with the sensor “ ULTRA “ for use in low and high viscous liquids.The ULTRA sensing probe consists of a stainless steel tube terminated by a PEEK head. The sensing probe includes an ultrasonic liquid level sensor, a temperature sensor and a conductivity electrode. The sensitivity for ullage and interface measurement does not require any adjustment. The sensor is calibrated once at the factory and does not require subsequent calibration. The temperature transducer is a RTD element. The characteristics of the RTD element are stored inside the sensor. The...

HERMetic Sampler GTX Chem or Sampler GTN Chem The HERMetic Sampler GTX Chem and HERMetic Sampler GTN Chem are designed for closed sampling of liquids or chemicals, which present a fire, health or air pollution hazard. The gas tight construction of these units avoids a pressure release from the tank and exposure to fumes during operation. HERMetic Sampler GTX Chem For the HERMetic Sampler GTX Chem the transfer of the liquid from the sampling bottle to a laboratory bottle occurs by overpressuring the upper chamber of the sampler with a pump. • fter sampling, the liquid can be transferred into a...