Portable Closed Gauging
4Pages

{{requestButtons}}

Catalog excerpts

Portable Closed Gauging - 1

Portable Closed Gauging The HERMetic UTImeter Gtex is a portable electronic level gauge for closed gas tight operation resulting in increased safety and efficiency. The unit is used for closed level gauging, temperature verification, custody transfer and free water detection on marine vessels. Connected to a HERMetic vapour control valve, the UTImeter Gtex avoids any gas release during operation and enables 3 measurements in one single operation, Ullage, Temperature and Oil-water interface level. By increasing safety and efficiency, Honeywell Tanksystem helps customers improve business performance.

Open the catalog to page 1
Portable Closed Gauging - 2

HERMetic UTImeter Gtex The HERMetic UTImeter Gtex is a portable gas tight liquid level gauge designed to operate on deck of marine vessels. The unit is used for cargo inspection, custody transfer, temperature measurement, free water detection and verification of fixed installed level gauging systems. Connected to a HERMetic vapour control valve fixed installed on deck, the HERMetic UTImeter Gtex avoids any gas release during operation. The unit enables 3, optionally 4 measurements in one single operation: • Ullage • Temperature • Oil-Water interface level • Innage, Reference height (Visc...

Open the catalog to page 2
Portable Closed Gauging - 3

ULTRA sensing probe Benefits: • 100 % repeatability of measures. • High accuracy and mechanical stability. • Chemically resistant to corrosive liquids (Chem version). • Small diameter for use on 1” HERMetic valves. • Sensor exchange without need of new calibration. • No temperature drift. No degradation of the sensitivity due to sensor ageing. Low maintenance cost: Fully modular unit. Change tape, storage tube, sensor or instrument unit yourself. Easy and detailed instructions in Operation and Service Manual. Visc version Storage tube SS2-Q2 Interchangeable adapters for connection to...

Open the catalog to page 3
Portable Closed Gauging - 4

Window wiper as standard on all UTImeter Gtex Buzzer on/off button LCD display with backlight Level reading on graduated tape through window Easy access to the tape allows fast cleaning. No screws, only five easy to open lid fastener Tape cleaning device Special tape protection tube to protect the tape from inadvertent cut by closing the valve while the sensor is inside the tank. This mechanical safety device prevents damages on tape and reduce repair costs. Tape cleaning device as standard on all UTImeter Technical specifications: Accuracy of ullage-interface detection: ± 2 mm (± 0.08”...

Open the catalog to page 4

All Enraf Marine Systems catalogs and brochures

  1. T901Px0

    2 Pages

  2. OptiLevel

    2 Pages

  3. CT801LB/S-B

    2 Pages

Archived catalogs