HERMetic UTImeter Gtex Portable electronic level gauge for closed gas tight operation. The HERMetic UTImeter Gtex is a portable electronic level gauge for closed gas tight operation resulting in increased safety and efficiency. The unit is used for custody transfer, temperature verification, inventory control measurement and free water detection on tankers. Connected to a HERMetic vapour control valve, the UTImeter Gtex avoids any gas release during operation and enables three measurements in one single operation: ullage, temperature, oil-water interface level.

HERMetic UTImeter Gtex The HERMetic UTImeter Gtex is a portable gas tight liquid level gauge designed for closed gauging of hydrocarbons and chemicals. The unit is used for custody transfer, inventory control measurement and free water detection on marine vessels. Connected to a HERMetic vapour control valve fixed on the tank, the HERMetic UTImeter Gtex avoids any gas release during operation. The unit enables 3, optionally 4 measurements in one single operation: • Ullage • Temperature • Oil-Water interface level • Innage, Reference height (Visc version) A gauge in different versions dedicated...

ULTRA sensing probe Benefits: • 100 % repeatability of measures. • Continuous temperature reading. • High accuracy and stability. • Chemically resistant to corrosive liquids (Chem version). • Easy access for battery exchange. • Sensor exchange without need of new calibration. • Low weight for easy operation and carry around. • No temperature drift. No degradation of the sensitivity due to sensor ageing. • Interchangeable adapters for connection to different vapour control valves. • Tape cleaning devices, window wiper and tape protection on all units as standard. Low maintenance cost: Fully modular...

All HERMetic UTImeters are now equipped with the sensor “ULTRA” for use in low and high viscous liquids. The ULTRA sensing probe consists of a stainless steel tube terminated by a PEEK head. The sensing probe includes an ultrasonic liquid level sensor, a temperature sensor and a conductivity electrode. The sensitivity for ullage and interface measurement does not require any adjustment. The sensor is calibrated once at the factory and does not require subsequent calibration. The temperature transducer is a RTD element. The characteristics of the RTD element are stored inside the sensor. The sensor...

Buzzer on/off button Window wiper as standard on all UTImeter Gtex LCD display with backlight Tape cleaning device as standard on all UTImeter Easy access to the tape allows fast cleaning. No screws, only five easy to open lid fastener Level reading on graduated tape through window Tape cleaning device Tape protection tube

Accuracy of ullage-interface detection: Ullage, interface indication: Maximum tank overpressure: Tape length: Tape graduation: Tape resolution: Tape accuracy: Meets API MPMS Chap 3.1A and ISO 4512 requirements Temperature accuracy: Meets API MPMS Chap 7 request Meets ISO 4268 , IP PMM Part IV Ambient temperature range: Temperature sensor measurement range: Temperature measurement resolution: Temperature reading: LCD Display: power: Weight with 15 meter / 50ft tape: Hazardous environments approvals ± 2 mm (± 0.08” approx.) Audible and Visible selectable 0,3 bar (4,4 psi) 15 m/50 ft, 30 m/100 ft,...