Gas detection in ballast tanks, dry void spaces and pump room The GASBAL™ system is designed to detect and analyse gas concentration in closed spaces such as ballast tanks, void or dry spaces. The system scrolls each input and activates an alarm if the gas concentration is over the pre-set value. This gas detection system can be installed on board tankers, OBOs, offshore vessels and rigs. The GASBAL™ system consists of two main units: • an analysing unit, including up to three different gas sensors, and up to 24 input channels for sampling and 6 channels for 4-20mA imputs (local gas transmitters). • a control unit, for local and/or remote operation, fitted with an LCD display and a keyboard, used to set up, operate, check and maintain the GASBAL™ equipment. Two digital RS485 ports allow control and communication with any host computers. The GASBAL™ Analysing Unit’s and local detectors, are delivered with factory calibration, covered by Honeywell Marine’s Certificate. Due to restriction on gas transportation, vessel should have relevant calibration gases available onboard (supplied by shipyard or local supplier).

Technical Data Dimensions & Fixation Number of channels: Gas detection: Alarm output: Alarm: Suction capacity: Automatic purge Power supply: Operating temperatures: Weight: up to 24. up to 7 diff. types (4-20mA sensor) Dry contacts for: Gas alarm System fault Horn & rotating lamp Power supply fault 2 adjustable set points per channel up to 400m 115/230 Vac / 50-60Hz -25°C + 70°C 32 kg Special Features Technical Documentation • Monitoring capacity up to 24 channels • Analysing up to 7 different gases • User friendly man-machine interface • Large display unit • MED approved in order to meet ISGOTT...