Catalogs >
ENAG >
Power supply – 230Vac – 500A mobile

Power supply – 230Vac – 500A mobile
2Pages

Catalog excerpts

Tactical power supply – Stabilized Energy Distribution System The tactical power supply ALMI is used to supply a stabilised, regulated voltage on the battlefield. A battery pack can be added to ensure a back-up. Made to work in rugged military environments the ALMI is weatherproof and can be transported without a separate container. It is particularly suitable for air transport. The ALMI is designed to power electronic systems with 230Vac network, such as satellite communication, C4ISR… The ALMI can be connected to 90 to 264Vac - 47 to 63Hz mains or to 24VDC voltage. The DC voltage can come from a battery pack or from an auxiliary network (vehicle network, solar panel …). Easy to install and deploy on the field, this equipment is very simple to use. The cables are integrated with the equipment to facilitate its transportati

Open the catalog to page 1

Input: • AC Input: o 90 to 264Vac single phase o Frequency : 47 to 63Hz o Power factor > 0.95 • DC input : o 21.3 to 30Vdc (depending on model) Output: • 230Vac ± 5 % single phase isolated • Frequency : 50Hz ± 2 % • Power 600 W or 1200W depending on model • 12Vdc ± 1% 8.3A depending on model • 24Vdc (21.3 to 30Vcc) 4A depending on model • 230 Vac non regulated 13A depending on model Technology: • On-line double conversion • Galvanic isolation Operating control: • Status lights. • Emergency stop. • Manual By-pass • On/Off switch depending on model • Input /output circuit breakers accessible...

Open the catalog to page 2

Power supply – 230Vac – 500A mobile 2Pages

Catalog excerpts

All ENAG catalogs and brochures

Power supply – 230Vac – 500A mobile
2Pages