Special motors - Range MTC-MTCF / MTA-MTAF Manufactured for intensive use in on-board applications (marine, railway…), these products can be provided with approval certificates from all the main classification companies (B.V, D.N.V, L.R, etc). They cab also be used in wet and aggressive environment for industrial applications. On request, we manufacture specific machines according to customer specifications : (winch, capstan, windlass, davit, ventilating, pump, propulsion, etc…) ‐ ‐ ‐ ‐ ‐ ‐ ‐ Fail-safe brake 1.5Cn - 2Cn - 2.5Cn – with manual release system Encoder Protection factor for motor + brake IP 56, 66, 68 Reheating Anti-slip Winding thermal protection sensor Underwater housing Main characteristics  AC or DC motors, monoblock cast iron, stainless steel housings  Cast iron bearings, large terminal box  Supply voltages : 230Vac to 690Vac 24Vdc – 12Vdc – 48Vdc – 72Vdc  Frequency : 50Hz-60Hz  Speed : 3000 - 1500 - 1000 – 750rpm  Power range : 0.37 to 400 Kw for AC motors 0.25kw to 2.2Kw for DC motors  Marine and tropicalised impregnation  Protection IP55 - 56 - 68 of the motor + brake  Mechanical adaptations : flange, specific shaft end  The rotors are dynamically balanced  The bearings are lubricated with lithium grease. The motors from 0.37kw to 55kw are equipped with bearings which are permanently greased.  Magnetic circuit with low loses * Many other options

Power in function of the shaft height and speed Shaft height FC-MOTSPE-EN-C The information contained in this leaflet is not of a contractual nature. ENAG reserves the right to amend the technical details of its products without advice notice. Please consult us before installing the unit.