Surface Finish Specification

The surface roughness is specified as Ra according to standard NFE 05-016.

Material and Coating

The component is made from Aluminum 5754 and is coated with paint.

General Tolerances and Standards

General dimensional tolerances follow ISO 2768-m standard.

Component Description

The document describes a rain protection grille made of aluminum. Optional features include a closure flap and a retention tray.

Dimensions and Assembly Notes

Key dimensions include height (H), length (L), and pitch (Pas) of 150 mm. Specific tolerances are +8/-10 mm for height and +80/-10 mm for length. The pitch is consistently 150 mm.

Document Control and Usage

The drawing is dated 17/07/2015, created and verified by designated personnel. Reproduction of this document or extracts is only authorized with written consent from ENAG SAS. Modifications are only permitted using SolidWorks 2008 software.

Contact Information

ENAG SAS, located at 31 rue Marcel Paul, ZI Kerdroniou - Est, 29000 Quimper, France. Phone: +33 (0)2 98 55 51 99, Fax: +33 (0)2 98 55 51 67, Website: www.enag.fr