Catalog excerpts
Electrical power supply GMDSS Range for Global Maritime Distress and Safety System (GMDSS) The power supply range FCA / ICA / FCC for GMDSS covers all vessel nationalities in the following areas of application: • Type of ship • Scope of application - title 2 and 3 • Operation zones A1/A2/A3/A4 Installed on ship, these power supplies provide power from several available sources of energy to the radio system and the emergency communication system. They insure an automatic switchover without cut-off between the main power source and the emergency power source. This power supply range is compliant with the requirements of the International Maritime Organisation (IMO), the French regulations (Division 219 - October 2000) and for equipment installed on the Bridge (CEI 945 Standard) The complete range is certified by Bureau Veritas -CERTIFICATE N° 10528/D1/BV The power supplies integrate the following functions: connection, protection, display, warning and switchover. The display can be integrated on the cabinet or can be remotely installed on a support close to the user. With the configuration of 6 protected outputs, the system can power for example: 1 emitter MF, 1 VHF ASN, 1 VHF ASN (duplication), 1 Immarsat C, 1 GPS, 1 emergency light indicator.
Open the catalog to page 1Power Supply selection 1. Power supply systems specified in the field of application for Chapter 2 or for all ships equipped with an INMARSAT system. A1/A2/A3/A4 oceanic areas - French or foreign ships Functions provided by ENAG power supply systems in accordance with Division 219-13 and IMO regulation • Automatic switchover, without disconnection of 3 power supply sources, • Regulated and filtered power supply charger unit in accordance with CEI 945 standard, • Protection of the radio electric equipment against primary source voltage surge, • Control of the charge/discharge voltage and...
Open the catalog to page 2FC-GMDSS-EN-E The information contained in this leaflet is not of a contractual nature. ENAG reserves the right to amend the technical details of its products without advance notice. ENAG S.A.S. - 31 Rue Marcel Paul - Z.I. Kerdroniou Est - 29000 Quimper- France Tel: + 33 2 98 55 51 99 - Fax: + 33 2 98 55 51 67 - E-mail: contact@enag.fr- Site : www.enag.fr
Open the catalog to page 3Note: • In an existing installation with AC main network, the FCC GMDSS RAE system may be installed in association with a battery charger. In this case, the charger must satisfy the following requirements: o It must have type approval or be certified by an approved organisation (BV, LLOYDS, ...), o It must meet the CISPR 16 standard (able to operate as a DC power supply), o It must have the "OVER SHOOT INHIBITED" function, o Any other configuration is prohibited as specified by regulations. • The FCC-GMDSS reference SEEL008462 can be used for Title 3 only and cannot be associated with a...
Open the catalog to page 4All ENAG catalogs and brochures
-
ALT range – 72Vdc-300A
2 Pages
-
ALT-ADT range – 28Vdc mobile
2 Pages
-
BDB range – Mobile discharge
2 Pages
-
DC/DC CONVERTER – SD RANGE
2 Pages
-
RADIATOR – RAEL RANGE
2 Pages
-
ADM-SB – C13100 range
4 Pages
-
Water separator
4 Pages
-
ONS range – AC/DC – Sinus
2 Pages
-
Propeller pitch indicator
2 Pages
-
Marine Battery
2 Pages
-
SD range – 12/48/110V
2 Pages
-
Battery monitor for JBNUM-II
2 Pages
-
CDS4 H range
2 Pages
-
CDS4 range – 12/24V
4 Pages
-
CDS3 range – 24V – BV
2 Pages
-
CDS3 range – 12/24/48V
2 Pages
-
CDS range – 12/24V
2 Pages
-
24Vdc alternator
2 Pages
-
Shaft line alternator
1 Pages
-
ADM-SB range – Marine
2 Pages
-
ADM-SB range – AC/DC
4 Pages
-
SQ range
2 Pages
-
ALM-ALT range – AC/DC
2 Pages
-
Grille pare-pluie marine
1 Pages
-
DC/DC converters - SD Range
2 Pages