DC/DC CONVERTER – SD RANGE
2Pages

{{requestButtons}}

Catalog excerpts

DC/DC CONVERTER – SD RANGE - 1

DC/DC converters - SD Range The SD series is a range of switch-mode DC/DC converters. These converters are dedicated to the supply of electric and electronic equipment. They guarantee the quality of the output voltage and ensure isolation. They can operate as battery chargers. Thanks to their input voltage range, they offer the possibility to connect directly on the banks of a battery. Their dimensions and weight allow easy maintenance. They are available in a power range 25 to 200 W. power 500W and 1000W upon request. ENAG S.A.S. - 31 rue Marcel Paul - Z.I. Kerdroniou Est - 29000 Quimper — FRANCE Tel: + 33 2 98 55 51 99 - Fax : + 33 2 98 55 51 67 - E-mail: contact@enag. fr - Site : www.enag.fr

Open the catalog to page 1
DC/DC CONVERTER – SD RANGE - 2

■ Input voltage: Input 12 Vdc at nominal rate : 10 to 18 Vdc Input 24 Vdc at nominal rate : 18 a 36 Vdc Input 48 Vdc at nominal rate : 36 to 72 Vdc ■ Output: Voltage adjustment by internal potentiometer on the front. Output 12 Vdc at nominal rate : 11 to 16 Vdc Output 24 Vdc at nominal rate : 21 to 32 Vdc Output 48 Vdc at nominal rate : 42 to 64 Vdc Output voltage setting as a battery charger : 13.6Vdc - 27.2 Vdc - 54.4 Vdc Other available voltages : 5 or 15 Vdc ■ Input protections: Against polarity reversal EMI filter By fuses ■ Output protections: Against short-circuits Against overload...

Open the catalog to page 2

All ENAG catalogs and brochures

  1. CDS4 H range

    2 Pages

  2. SQ range

    2 Pages