*mynauticexpo

Catalogs
ENAG
CDT range – 24 to 110V – Mobile

CDT range – 24 to 110V – Mobile

Product catalog summary

Overview: The CDTV range of battery chargers utilizes switch-mode technology, making them compact and lightweight. They are compatible with various battery technologies, including recombined sealed lead, open lead, calcium lead, classic lead, and nickel-cadmium batteries. These chargers ensure proper charging and maintenance of batteries and can also function as DC power supplies. Certified by Bureau Veritas, they are suitable for marine, offshore military, railway, and industrial applications.

Specifications:

Input: Voltage ranges from 340 to 576 Vac three-phase, with a frequency of 47 to 63 Hz. Other voltages and frequencies are available upon request.
Output: Standard output is 24 Vdc with a floating voltage of 27.2 Vdc. Other voltages are available upon request.
Technology: Features switch-mode technology with filtered direct current, electronic current limitation, and short-circuit protection. Designed to minimize interference with the mains network.
Output Electrical Characteristics: Regulation is ± 1% (steady state) with a residual ripple of less than 200 mV. Includes galvanic insulation between input and output, and supports I/U type floating charge.

Display and Control: Equipped with a "Power on" indicator, voltmeter, ammeter, and ON/OFF switch. Additional indicators and controls are available upon request.

Protection: Includes bipolar fuses for input and output, protection against short-circuit and polarity reversal, thermal protection, and tropicalization of the electronic board. Designed to withstand on-board shock and vibration.

Mechanical and Climatic Specifications:

Presentation: Housed in a metal case with IP 23 protection, featuring a polyester finish in off-white RAL9001. Resistant to salt atmosphere.
Climatic: Operating temperature ranges from -10 to 50°C, with storage temperatures from -20 to 70°C. Humidity tolerance is from 0 to 95% without condensation.

Options: Additional outputs, voltage threshold control PCB, charge fault PCB, insulation regulator, dry contacts, and other status indicators are available. Further options can be discussed with the manufacturer.

Standards: The product is EC Marked and certified by Bureau Veritas.

Catalog excerpts

Switch-mode filtered controlled battery chargers -CDTV Range Using switch-mode technology, compact and lightweight, the CDTV range battery chargers can be associated with any battery technology (recombined sealed lead, open lead, calcium lead, classic lead, nickel cadmium batteries, ...)■ They insure the charging and maintenance of the batteries and an adequate current for the outputs. Using switch-mode technology, they can function as DC power supplies. Certified by Bureau Veritas, they can be used in numerous applications: marine - offshore military - railway - industry Bureau Veritas certificate of type approval n° 06352/E0 BV

Open the catalog to page 1

Main technical specification Input: • Voltage : from 340 to 576 Vac three-phase • Frequency : 47 to 63 Hz • Other voltages, frequency: upon request. Output: • 24 Vdc - floating voltage: 27,2 Vdc. • Other voltages: upon request. Technology: • Switch-mode technology. • Filtered direct current (possible operation as power supply). • Electronic limitation of the output current. • Short-circuit possible without any damage to the equipment. • Designed to reduce interferences reinjected to the mains network. Output electrical characteristics : • Regulation: ± 1 % (steady state). • Residual ripple: <...

Open the catalog to page 2

All ENAG catalogs and brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list