*mynauticexpo

Catalogs
ENAG
CDS4 range – 12/24V

CDS4 range – 12/24V

Product catalog summary

Introduction
ENAG introduces the CDS4 range of battery chargers, designed to replace the CDS3 range. These chargers are versatile, functioning as battery chargers, DC power supplies, or as part of backup power systems. They are suitable for marine, defense, and industrial applications.

Key Features

Efficiency: Wide input voltage range, operates up to 60°C without derating, plug and play functionality, three outputs for load distribution, optional CAN bus communication.
Reliability: Supports various battery types (AGM, GEL, Lithium, etc.), multiple charge cycles (Boost, Absorption, Floating, etc.).
Ruggedness: Marine tropicalized boards, efficient thermal dissipation, recyclable thermoplastic packaging.

Temperature Probe
The STP-NEW-2.8 probe adjusts charge voltage based on ambient temperature, with specific compensation values for 12V and 24V batteries.

Alarm Board
Provides two alarms for external monitoring: low battery voltage and charger faults, with specific voltage thresholds for 12V and 24V models.

CAN Interface
Enables communication with monitoring systems or peripherals via CAN bus.

Display Options

Analog Displays: Remote voltage and current display via voltmeters and ammeters.
Touch Screen Display: 2.5” color display for monitoring and adjusting charge parameters, supports multiple languages.

Technical Specifications

Input: Voltage range 90-265 VAC, frequency 47-65 Hz, power factor 1, efficiency 90%.
Output: Various models with different current/power ratings, three positive outputs, selectable charging curves.
Environment: Operating temperature -20 to 60°C, storage temperature -20 to 70°C, IP22 protection.
Standards: CE/EMC EN 61204-3, CE/security EN 60335-2-29.

Options
Includes temperature probe, alarm board, CAN-BUS interface, analog displays, and touch screen display.

Note
The information is subject to change without notice. Consult ENAG before installation.

Catalog excerpts

^ l'energie creative d'un constructeur Battery chargers - CDS4 12V and 24V Range ENAGs new generation of battery chargers are designed to replace the popular CDS3 range. This latest addition to our product range with new functionalities is simple to use. Polyvalent, it can be used as a battery charger, a DC power supply or integrated into your back up power supply systems. Adapted for all types of applications such as: marine, defense, industrial... With ENAGs new range of automatic battery chargers you are assured of: O Efficiency: - A wide input voltage range - Works at temperatures of up to 60°C without derating - Plug and play function - Three outputs with distribution of the load current - CAN bus communication (option) O Reliability: - Battery type selection: AGM, GEL, Open lead/acid, Lead-calcium, Lithium, etc. - Charge cycle selection: Boost, Absorption, Floating, Automatic Refresh, Reboost. o Ruggedness: - Boards marine tropicalized - Efficient thermal dissipation - Thermoplastic packaging (recyclable)

Open the catalog to page 1

Temperature probe : The STP-NEW-2.8 temperature probe allows compensation of the charge voltage in function of the ambient temperature in the battery room. The voltage compensation applied is : • -18mV/°C for 12V batteries • -36mV/°C for 24V batteries Alarm board : This option allows two alarms (dry contacts: normally-open or normally closed) to be transmitted to an external monitoring system. Alarm «battery (+BAT1) low» is triggered if the voltage of the battery bank is less than: - 10.2V±5% (for 12V models). - 20.4V±5% (for 24V models). Alarm «charger fault» is triggered if: - The charger is...

Open the catalog to page 2

External analog displays Analog voltmeters: The voltage values of +BAT1, +BAT2 and +BATD can be remotely displayed on analog voltmeters . Analog ammeter : An analog ammeter can be used to measure the output current of the charger (battery + user) This option requires also the alarm board option Touch screen numeric display: This 2.5’ color touch screen display allows visualization of all the charge parameters while the charger is working and can also be used to supervise the batteries when the charger is off. Intuitive and easy menu navigation which : - gives access to the following information: -...

Open the catalog to page 3

The information contained in this leaflet is not of a contractual nature. ENAG reserves the right to amend the technical details of its products without advance notice. Please consult us before installing the units. FC-CDS4-EN-D The information contained in this leaflet is not of a contractual nature. ENAG reserves the right to amend the technical details of its products without advance notice. ENAG S.A.S. - 31 Rue Marcel Paul - Z.I. Kerdroniou Est - 29000 Quimper- France Tel: + 33 2 98 55 51 99 - Fax: + 33 2 98 55 51 67 - E-mail: [email protected] Site : www.enag.fr

Open the catalog to page 4

All ENAG catalogs and brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list