*mynauticexpo

Catalogs
ENAG
CDS3 range – 24V – BV

CDS3 range – 24V – BV

Product catalog summary

Overview: The CDS3V range of battery chargers, certified by Bureau Veritas, utilizes switch-mode technology to provide compact and lightweight solutions for charging and maintaining various battery types, including sealed lead, open lead, calcium lead, classic lead, and nickel-cadmium batteries. These chargers can also function as DC power supplies and are suitable for applications in marine, offshore, military, railway, and industrial sectors.

Specifications:

Input: Voltage range from 85 to 265 VAC single-phase; Frequency from 47 to 63 Hz (automatic).
Output: 24 Vdc with voltage adjustment via internal potentiometer; 3 automatic charge cycles: boost, absorption, floating; 4-hour boost duration.
Electrical Characteristics: Regulation of ± 1%; Residual ripple < 200 mV; Efficiency > 80% at rated conditions; Power factor of 0.9 in nominal condition.
Display: 3 LEDs for AC presence and charge phase; Voltmeter and ammeter output display; Output on dry contact for charger fault and battery low voltage.
Protections: Fuses on input and output; Protection against short-circuits, polarity reversal, over-voltage, over-heating, over-current; Thermal protection; Electronic limitation of charge current; Water-proof and tropicalized varnish on electronic board.
Presentation: Metal and plastic case with IP22 protection; AC input connection via screw terminal with clamp; Specific connection area for safe installation; Polyester finish in matt black RAL9011, grey RAL7035, and blue RAL5012; Salt atmosphere resistant.
Climatic Specifications: Operating temperature from -10 to +55°C with derating above; Automatic stop and restart for temperatures > 65°C; Storage temperature from -20 to 70°C; Humidity from 0 to 95% without condensation.
Standards: CE, RoHS, Bureau Veritas certified.

Standard Range:

CDS3V60: Item Code SEEL016263, Output current 60A, 3 outputs, IP22 protection, Dimensions 262*350*120 mm, Weight 7.8 kg.
CDS3V75: Item Code SEEL016338, Output current 75A, 3 outputs, IP22 protection, Dimensions 262*350*120 mm, Weight 7.8 kg.

Catalog excerpts

Battery Chargers CDS3V range BV approved Using switch-mode technology, compact and lightweight, the CDMV range battery chargers can be associated with any battery technology (recombined sealed lead, open lead, calcium lead, classic lead, nickel cadmium batteries, ...)■ They insure the charging and maintenance of the batteries and an adequate current for the outputs. Using switch-mode technology, they can function as DC power supplies. Certified by Bureau Veritas, they can be used in numerous applications : marine - offshore military - railway - industry. Bureau Veritas certificate of type approval n° 06352/E0 BV

Open the catalog to page 1

Input: • Voltage: from 85 to 265 VAC single-phase • Frequency: from 47 to 63 Hz (automatic). Output: • 24 Vdc • Output voltage adjustment by internal potentiometer (factory set). Technology: • Switch mode technology. • 3 automatic charge cycles: boost, absorption, floating. Floating voltage IU through internal setting. • 4 hours boost duration. Output electrical characteristics: • Regulation: ± 1 %. • Residual ripple: < 200 mV. • Typical efficiency: > 80% at rated conditions. • Power limitation through external bipolar switch. • Power factor: 0.9 in nominal condition Display: • 3 LEDS monitor...

Open the catalog to page 2

All ENAG catalogs and brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list