*mynauticexpo

Catalogs
ENAG
CDS3 range – 12/24/48V

CDS3 range – 12/24/48V

Product catalog summary

Overview: The CDS3 range of battery chargers is designed for marine, industrial, and defense applications, offering innovation through an extended range of charger powers, multiple battery settings, and enhanced remote monitoring capabilities. The chargers support power-sharing for up to six units and provide high efficiency.

Specifications:

Input: Voltage ranges from 85 to 265 VAC single-phase, with a frequency of 47 to 63 Hz. The 24-150 model requires 304/552Vac 3-phase.
Output: Available in 12 Vdc, 24 Vdc, or 48 Vdc with adjustable output voltage via an internal potentiometer.
Technology: Utilizes switch mode technology with three automatic charge cycles: boost, absorption, and floating. Efficiency exceeds 80% under rated conditions.
Display: Features three LEDs for monitoring AC presence and charge phases, along with voltmeter and ammeter outputs.
Protections: Includes fuses, short-circuit, polarity reversal, over-voltage, overheating, and over-current protections, with thermal protection and waterproof electronic boards.

Models and Dimensions:

12 Vdc range: Models include CDS3 12/80 and CDS3 12/100 with varying outputs and dimensions.
24 Vdc range: Models include CDS3 24/60, CDS3 24/75, CDS3 24/120, and CDS3 24/150 with different outputs and dimensions.
48 Vdc range: Models include CDS3 48/30 and CDS3 48/60 with specific outputs and dimensions.

Environmental and Safety Standards:

Operating temperature ranges from -10 to +55°C, with automatic stop and restart for temperatures above 65°C.
Storage temperature ranges from -20 to 70°C, with humidity tolerance up to 95% without condensation.
Complies with CE and RoHS standards.

Additional Features: The chargers are housed in metal and plastic cases with IP22 or IP23 protection, featuring a polyester finish resistant to salt atmospheres. They include specific connection areas for safe installation and additional terminals for external battery isolators on select models.

Catalog excerpts

Switch-mode filtered controlled battery chargers -CDS3 Range - MARINE - INDUSTRY - DEFENSE The CDS3 battery charger range is designed to bring to more innovation for your installation: • An extended range of charger powers • 11 battery settings such as Lead-sealed, Calcium-Lead, AGM, Gel, etc. • Additional remote information for batteries and charger state • Additional terminal to connect an external battery isolator for additional battery banks • High level of efficiency. • Power-sharing function (parallel-mounting) for up to 6 chargers. Standard range

Open the catalog to page 1

Input: • Voltage: from 85 to 265 VAC single-phase (automatic except for model 24-150: 304/552Vac 3-phase). • Frequency: from 47 to 63 Hz (automatic). Output: • 12 Vdc, 24 Vdc or 48Vdc. • Output voltage adjustment by internal potentiometer (factory set). Technology: • Switch mode technology. • 3 automatic charge cycles: boost, absorption, floating. Floating voltage IU through internal setting. • 4 hours boost duration. Output electrical characteristics: • Regulation: ± 1 %. • Residual ripple: < 200 mV. • Typical efficiency: > 80% at rated conditions. • Power limitation through external bipolar...

Open the catalog to page 2

All ENAG catalogs and brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list