*mynauticexpo

Catalogs
ENAG
CDS range – 12/24V

CDS range – 12/24V

Product catalog summary

Overview: The CDS Range of switch-mode filtered controlled battery chargers are designed to be compact, lightweight, and aesthetically pleasing. They comply with all battery manufacturers' specifications and utilize advanced switch-mode technology to function as both a power supply and a charger.

Standard Range: The CDS range includes models such as CDS 70 12/6, CDS 120 12/10, CDS 70 24/3, and CDS 120 24/5, each with varying power outputs and dimensions. These chargers are equipped with two outputs and are designed for ease of use and safety.

Main Technical Specifications:

Input: 115 or 230 Vac ± 15% single-phase, selectable by internal switch, with a frequency range of 47 to 63 Hz.
Output: Available in 12 Vdc or 24 Vdc, adjustable via an internal potentiometer.
Technology: Features switch-mode technology with three automatic charge cycles: boost, absorption, and floating. Includes a programmable timed boost and built-in charge distributor for two battery outputs.
Output Electrical Characteristics: Regulation at ± 1%, residual ripple < 200 mV, and typical efficiency of 75%.
Display and Control: Equipped with LEDs for mains presence and charge status, and provides voltmeter and ammeter outputs on internal terminals.
Protections: Includes fuses on input and output, varistor for AC over-voltage protection, power limitation for overloads, short-circuit protection, polarity reversal protection, and thermal protection. The electronic board is protected against tropical conditions.
Presentation: Housed in a metal case with IP 22 rating, featuring a polyester finish in matt black, grey, and blue. Resistant to salt atmosphere.
Climatic Specifications: Operating temperature range from -10 to 50°C, storage temperature from -20 to 70°C, and humidity tolerance from 0 to 95% without condensation.

Additional Information: The document notes that the information is not contractual and ENAG reserves the right to amend technical details without notice. The chargers are EC marked.

Catalog excerpts

Switch-mode filtered Controlled battery chargers CDS Range Compact, lightweight and aesthetic, the CDS (Selective Dedicated Charge) battery chargers are fully compliant with all the battery manufacturers’ specifications. Using switch-mode technology, they can function as power supply and they offer all the safety and convenience that advanced technology can provide.

Open the catalog to page 1

Main technical specification Input : • 115 or 230 Vac ± 15% single-phase. • Selection by internal switch. • Frequency: 47 to 63 Hz. Output : • 12 Vdc ou 24 Vdc depending on model. • Internal potentiometer allows output voltage to be adjusted. Technology : • Switch mode technology. • 3 automatic charge cycles: boost, absorption, floating (I, U, U). • Timed boost programmable by internal switch. • Internal switch for selecting the level of charge. • Built-in charge distributor (2 battery outputs). Output electrical characteristics : • Regulation: ± 1 %. • Residual ripple: < 200 mV. • Typical efficiency:...

Open the catalog to page 2

All ENAG catalogs and brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list