*mynauticexpo

Catalogs
ENAG
CDP range – Mobile Charge/Décharge

CDP range – Mobile Charge/Décharge

Product catalog summary

Product Overview:
The Charge/Discharge Bank (CDP) is designed for workshops or field maintenance of nickel-cadmium and lead batteries. It supports various voltage settings and current capacities, making it versatile for different battery types and configurations.

Product Range:
The CDP range includes models with varying voltage and current specifications, suitable for both nickel-cadmium and lead batteries. Key models include:

CDP 32V C80A – D50A NiCd
CDP 40V C60A – D52A NiCd
CDP 95V C30A – D26A NiCd
CDP 105V C25A – D23A NiCd
CDP 170V C15A – D13A NiCd

Lead models can also be used with 2V, 12V, and 24V lead batteries.

Main Technical Specifications:

Input: 230 Vac ± 15%, single-phase, 47 to 63 Hz, 15A max, power factor > 0.9
Display/Control: ON/OFF switch, emergency stop, digital voltmeter and ammeter, buzzer and reset
Protection: Input RFI filter, output fuses, thermal sensor
Operating Temperature: 0 to 45°C for CDP 32V, 0 to 35°C for other models
Humidity: Up to 95%
Storage Temperature: -40°C to +70°C
Dielectric Withstand: 1500 Vac for input/earth and output/earth
Standards: Safety: EN 60950, EMC: EN 50091-1/50091-2, CE marking

Charger Features:

Charge Current: Adjustable by potentiometer, varies by model
Charge Duration: Programmable from 1 minute to 99 hours
Protection: Maximum voltage adjustable, polarity reversal

Discharger Features:

Discharge Current: Adjustable by potentiometer, varies by model
Discharge Duration: Programmable from 1 minute to 99 hours
Protection: Minimum voltage adjustable, polarity reversal

Mechanical Characteristics:

Dimensions: W 600 mm, D 620 mm, H 400 mm
Weight: 57 Kg (with cables)
Protection: IP 22
Connections: Mains cable, battery cables, thermal sensor connector

Additional Options:
An acquisition option is available to register battery values in voltage and current.

Note: The information is subject to change without notice. Consult ENAG before installation.

Catalog excerpts

Charge / Discharge BankType: CDP Presentation : • Workshops or in the field maintenance Nickel cadmium batteries: 24, 28 V, 72V or 110V Lead batteries: 2V, 12V or 24V Compact • Controlled constant current for charging and discharging • Charge and discharge of a complete block of batteries or of single elements Easy to use (*) the lead models (Pb) can also be used with 2 V, 12V and 24V lead batteries. CONVERSION D’ENERGIE • ELECTRONIQUE DE PUISSANCE • ELECTROMECANIQUE • MACHINES TOURNANTES S.A.S. au Capital de 1 372 500 € • R.C.S. Quimper B 351349 998 ooo36 • N°Identification T.V.A.: FR 88 351 349 998

Open the catalog to page 1

Main technical specifications Input: Voltage : 230 Vac ± 15% - single phase Frequency : 47 to 63 Hz Input current: 15A max. Power factor: > 0,9 Display / Control : ON / OFF switch - Emergency stop Indicators : Power on - Emergency stop -Thermal fault - Battery detection - Forcing Digital voltmeter and ammeter Buzzer and reset Protection : Input RFI Filter Output fuses Thermal sensor for battery supplied. Operating temperature: 0 to 45°C at full power for CDP 32V 0 to 35°C at full power for other models Above these temperature, derating applies. Forced convection Humidity : up to 95% Storage temperature -...

Open the catalog to page 2

All ENAG catalogs and brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list