Catalogs >
ENAG >
CDMV range – 24V – Single phase

CDMV range – 24V – Single phase
2Pages

Catalog excerpts

Switch-mode controlled filtered battery chargers CDMV range Using switch-mode technology, compact and lightweight, the CDMV range battery chargers can be associated with any battery technology (recombined sealed lead, open lead, calcium lead, classic lead, nickel cadmium batteries, ...). They insure the charging and maintenance of the batteries and an adequate current for the outputs. Using switch-mode technology, they can function as DC power supplies. Certified by Bureau Veritas, they can be used in numerous applications : marine - offshore military - railway - industry... Bureau Veritas certificate of type approval n° 06352/E0 bV.

Open the catalog to page 1

Main technical specification Input: • Voltage : 230 or 115VAC +/-10% single-phase • Frequency : 47 to 63 Hz • Other voltages, frequency: upon request. Output: • 24 Vdc - floating voltage: 27,2 Vdc. • Other voltages: upon request. Technology: • Switch-mode technology, • Filtered direct current (possible operation as power supply). • Electronic limitation of the output current. Short-circuit possible without any damage to the equipment. • Designed to reduce interferences reinjected • to the mains network. Output electrical characteristics: • Regulation: ± 1 % (steady state). • Residual...

Open the catalog to page 2

CDMV range – 24V – Single phase 2Pages

Catalog excerpts

All ENAG catalogs and brochures

CDMV range – 24V – Single phase
2Pages