Catalogs >
ENAG >
BCD range – Mobile Charge/Discharge

BCD range – Mobile Charge/Discharge
2Pages

Catalog excerpts

Charge & discharge Bank - BCD The BCD range completes the popular CDP range. This range proposes higher power than the CDP range keeping the same useful features With these banks, the batteries can be tested in a secure environment with regulated current during the charge and the discharge The complete BCD range is covering battery voltage from 12V to 190V and a current from 12 to 125A depending on the model. Most of models are mobile and easily moveable in the workshop. The charge and discharge functions are independent and can be used simultaneously to gain time.

Open the catalog to page 1

Input: • Voltage : 230Vac ± 10% (one or two inputs depending on the model) • Frequency: 50/60Hz ± 5 %. • Current : < 32A (depending on the model) Output: • Charger Voltage : from 12 to 190Vcc - See the range • Charge Current : Up to 50A - See the range • Discharger Voltage : from 10 to 190V - See the range • Discharge Current : up to 125A - See the range • Regulated Current Display and Control Charger options: • ON/OFF Charger Switch • I tuning potentiometer • U tuning potentiometer • I display • U display • I set / display push button • U set / display push button • Start cycle push...

Open the catalog to page 2

BCD range – Mobile Charge/Discharge 2Pages

Catalog excerpts

All ENAG catalogs and brochures

BCD range – Mobile Charge/Discharge
2Pages