ELNA STA 50 HV K
3Pages

{{requestButtons}}

Catalog excerpts

ELNA STA 50 HV K - 1

STA 50 HV / K – Tiltable and detachable antenna STA 50 HV / K Description This rod antenna features a tilting device and is easily detachable (i.e. can be unscrewed at the base). At the same time, the STA 50 HV / K is rugged and ideally suited for maritime mobile services. It features the proven ELNA quality and reliability even in most demanding environments. Installation Please find a freestanding mounting position with as little as possible obstruction and no near-by metallically conducting constructions. Whenever possible, install the antenna in a sloping position (about five degrees to the vertical). In this way the rotary motion of the antenna is being reduced remarkably during pitching and heeling in heavy sea. Safety precautions Prior to installing the antenna, make sure that the antenna is not connected to any radio transmitter. The metallic tilting device and the union nut are under voltage when transmitting. Hence, it is pivotal to apply the contact protection “S” ( “Sea”) when the antenna rod is mounted. Whenever the antenna rod is detached, apply the contact protection “H” (“Harbour”). Maintenance and service The antenna STA 50 HV / K is virtually maintenance-free. The antenna shall be cleaned by using sweet water. In case of heavy oily contamination, soft cleaners (detergents) may be added. The fixing bolts of the antenna base, the union nut and the RF connection should be yearly checked for tight fastening. ELNA GmbH – Heidehofweg 22 – 25499 Tangstedt Tel.: 04101/301-01 – Fax: 04101/301 333 – inf

Open the catalog to page 1
ELNA STA 50 HV K - 2

STA 50 HV / K - Tiltable and detachable antenna ELNA GmbH - Heidehofweg 22 - 25499 Tangstedt pi iLl

Open the catalog to page 2
ELNA STA 50 HV K - 3

STA 50 HV / K – Tiltable and detachable antenna STA 50 HV / K ELNA GmbH – Heidehofweg 22 – 25499 Tangstedt Tel.: 04101/301-01 – Fax: 04101/301 333 – info@elna.d

Open the catalog to page 3

All ELNA catalogs and brochures