FOR LADEN CONTAINER HANDLING WITH RAIL MOUNTED OR RUBBER TYRED GANTRY CRANES Standard supply includes: ♦ Mounting arrangement to fit crane ♦ Four pendular ISO twistlocks ♦ Lifting eyes near twistlocks ♦ Solenoid valves for all hydraulic functions ♦ Electrical and mechanical twistlock protection and indication system ♦ Electric telescoping protection system ♦ Lift enable signal ♦ Remote access for troubleshooting assistance ♦ Idle mode on power pack for low noise operation Spreader Model 8215 Vectrix is a telescopic top lift spreader for handling of laden ISO containers up to 45 tonnes. 8215 Vectrix is designed for mounting on Automated Rail Mounted (ARMG), Rail Mounted (RMG), Automated Rubber Tyred (ARTG) or Rubber Tyred Gantry (RTG) cranes. The strong and basic concept offers distinct advantages, such as two parallel telescopic beams, assuring max overlap. The beam sections are dimensioned to absorb not only the vertical, but also the very considerable horizontal forces. VECTRIX Engineered with precision and combining years of experience with forward-thinking innovation, the Vectrix spreader series sets a new standard in performance. Central to its performance is the idea of vector meets matrix - a balance of strength, durability, and smart mechanics. This synergy allows the Vectrix spreaders to be energy efficient and at the same time robust and trustworthy. With a modular design, the Vectrix spreader series offers a cost-effective customization by the possibility to easily adapt and replace individual components to meet specific operational needs, resulting in easier maintenance, reduced downtime, and an extended lifespan. TWISTLOCK SYSTEM The twistlock system is manufactured in a very rugged design and well proven since many years. 8215 Vectrix has hardened, penduling ISO quick exchange twistlocks, hydraulically activated with electrical and mechanical interlocking against faulty locking and unlocking. TELESCOPING SYSTEM Telescoping is powered by one hydraulic cylinder per beam. Placed on top of mainframe for easy accessability. Double electric motor- and pump assemblies assure synchronized telescoping of the beams. HYDRAULIC SYSTEM Double electric motors and pump assemblies assure simultaneous telescoping of both beams. The spreader can be operated with one electric motor and pump. CONTROL AND PROTECTION SYSTEM The control voltage on the spreader is always converted to 24V DC for safety and reliability. Electrical systems monitor the state of the spreader at all times. Indicator lights advise the operator when the spreader is correctly seated, locked or not locked. Each signal is a precondition for the important protection functions of the spreader, such as twistlock activation, telescoping and lift interrupt. DESIGN STANDARDS The spreader is designed in compliance with EN15056 and EN13001. ELME Swedish Spreader Systems

Change Change Date Chg'd By By Changed Changed Date Chg'd Changed Date ©June 2026 ELME Spreader AB TECHNICAL SPECIFICATIONS REPRODUCTION OR DISCLOSURE TO THIRD PARTIES IN ANY FORM WHATSOEVER, IS NOT ALLOWED WITHOUT WRITTEN CONSENT OF THE PROPRITIORS. REPRODUCTION OR DISCLOSURE TO THIRD PARTIES IN ANY FORM WHATSOEVER, IS NOT ALLOWEDOR WITHOUT WRITTEN OF THE PROPRITIORS. REPRODUCTION DISCLOSURE TO CONSENT THIRD PARTIES IN ANY FORM WHATSOEVER, IS NOT ALLOWED WITHOUT WRITTEN CONSENT OF THE PROPRITIORS. 8 300 kg without extra equipment Lifting capacity (SWL), twistlocks 45 tonnes ± 10% eccentric load...