FOR LADEN CONTAINER HANDLING WITH RAIL MOUNTED OR RUBBER TYRED GANTRY CRANES Standard supply includes: ♦ Mounting arrangement to fit crane ♦ Four pendular ISO twistlocks ♦ Lifting eyes near twistlocks ♦ Solenoid valves for all hydraulic functions ♦ Electrical and mechanical twistlock protection and indication system ♦ Electric telescoping protection system ♦ Lift enable signal ♦ Remote access for troubleshooting assistance ♦ Idle mode on power pack for low noise operation Spreader Model 8210 Vectrix is a telescopic top lift spreader for handling of laden ISO containers up to 45 tonnes^ 8210 Vectrix is designed for mounting on Automated Rail Mounted (ARMG), Rail Mounted (RMG), Automated Rubber Tyred (ARTG) or Rubber Tyred Gantry (RTG) cranes- The strong and basic concept offers advantages, such as two parallel telescopic beams, assuring max overlap. Beam sections dimensioned to absorb not only the vertical, but also the very considerable horizontal forces. VECTRIX Engineered with precision and combining years of experience with forward-thinking innovation, the Vectrix spreader series sets a new standard in performance. Central to its performance is the idea of vector meets matrix - a balance of strength, durability, and smart mechanics. This synergy allows the Vectrix spreaders to be energy efficient and at the same time robust and trustworthy. With a modular design, the Vectrix spreader series offers a cost-effective customization by the possibility to easily adapt and replace individual components to meet specific operational needs, resulting in easier maintenance, reduced downtime, and an extended lifespan. TWISTLOCK SYSTEM The twistlock system is manufactured in a rugged design and is well-proven since many years. 8210 Vectrix has hardened, pendulling ISO quick exchange twistlocks, hydraulically activated with electrical and mechanical interlocking against faulty locking and unlocking. TELESCOPING SYSTEM Telescoping is powered by one hydraulic cylinder per beam. Placed on top of mainframe for easy accessability. Double electric motor- and pump assemblies assure synchronized telescoping of the beams. HYDRAULIC SYSTEM Double electric motor- and pump assemblies assure simultaneous telescoping of both beams. Spreader can be operated with one electric motor and pump. CONTROL AND PROTECTION SYSTEM Control voltage on the spreader is always converted to 24V DC for safety and reliability. Electrical systems monitor the state of the spreader at all times. Indicator lights advise the operator when the spreader is correctly seated, locked or not locked. Each signal is a precondition for the important protection functions of the spreader. Such as twistlock activation, telescoping and lift interrupt. DESIGN STANDARDS The spreader is designed in compliance with EN15056 and EN13001. ELME Swedish Spreader Systems

©June 2026 ELME Spreader AB TECHNICAL SPECIFICATIONS Type of application 8 300 kg without extra equipment Lifting capacity (SWL), twistlocks 45 tonnes ± 10% eccentric load Lifting capacity (SWL), lifting eyes Telescopic positions Telescoping speed from 20ft-40ft Hydraulics, operating pressure up to Hydraulics, flow Hydraulics, tank volume Power supply Electrical motors Electric - control voltage Corrosion class Control switch for remote access. All specifications are subject to change without notice. A list of options enables you to adapt the product more precisely to your needs and further information...