MODEL 817 TOP LIFT HEAVY DUTY SPREADER FOR LADEN CONTAINER HANDLING WITH REACH STACKERS Standard supply includes: head The ELME Spreader Model 817 Pioneer is a first-of-its-kind telescopic top lift spreader designed for heavy duty use on reach stackers, handling laden ISO containers weighing up to 55 tonnes. Pioneer is designed for the high-demand heavy operation user, featuring a sturdy, reinforced design with generous access for maintenance. exchange pendular twistlocks that are hydraulically activated with mechanical interlocking against faulty locking and unlocking. BUILT TO LAST Pioneer’s design represents a new reach stacker spreader for heavy duty handling, combining increased structural strength with extended lifetime. TELESCOPING, SIDESHIFT AND ROTATION SYSTEM Telescoping is powered by one hydraulic cylinder for each end beam and sideshift is executed by one hydraulic cylinder. The cylinders are positioned on top of the main frame. Rotation is done by a slewing ring with double transmissions for turning and brakes for holding. . Mounting arrangement to fit the boom . Mechanical pile slope (MPS) . Powered pile slope (PPS) available as . Four vertical pendular ISO twistlocks . Lifting eyes near twistlocks . Hydraulic telescoping . Hydraulic sideshift . Hydraulic rotation . Solenoid valves for all hydraulic functions . Electrical and mechanical twistlock protection and indication system . Electric telescoping protection system . LED indication lights . LED work lights The Pioneer spreader is available in the following configurations: Increased capacity: 55-tonne capacity for 20-40ft. Increased durability: 45-tonne capacity for 20-40ft. 45ft lift position: 45-tonne capacity. The fully reinforced structural design enables each configuration to support lifting between the standard lifting positions. TWISTLOCK SYSTEM The well-proven twistlock system from previous generations, manufactured in a rugged design, carries all its benefits into the new heavy duty spreaders. 817 Pioneer has hardened ISO quick CONTROL AND PROTECTION SYSTEM The ELME Neuron CAN bus system, designed for maximum robustness, monitors the state of the spreader at all times. Indicator lights advise the operator when the spreader is correctly seated, locked or not locked. Each signal is a precondition for the important protection functions of the spreader such as lift interrupt. Neuron uses J1939 protocol which provides fault code messaging to alert driver and maintenance personnel of possible component failures.

©March 2026 ELME Spreader AB Reinforced extension beams support lifting between standard stop positions, enabling flexible handling with slings. TECHNICAL SPECIFICATIONS Type of lifting system Four vertical twistlocks 10 100 kgs without extra equipment Lifting capacity (SWL), spreader 55 tonnes ± 10 % eccentric load Lifting capacity (SWL), lifting eyes Telescopic positions Mechanical pile slope (MPS) Hydraulics, pressure Hydraulics, flow Electric - control voltage Corrosion class Optimized lifting eye positioning for handling narrow to wide cargo. Generous access points for ease of maintenance....