Model 9530
2Pages

MODEL 9530 PIGGYBACK ATTACHMENT Standard supply includes: . Mounting arrangement to fit the spreader . Four foldable piggyback legs in an automatic sequence . Hydraulic leg folding . Hydraulic clamp and unclamp . Solenoid valves for all hydraulic functions . Electrical protection and indication system for trailer handling . The attachment can be supplied without power pack and with quick connectors for hydraulic supply ELME Piggyback attachment 9530 is a removable unit mounted under any 20ft ISO crane spreader − dedicated for the handling of trailers, swap bodies and bottom lift containers. The typical property of this attachment is to be easily attachable and detachable. It is also its main advantage and 9530 is the given choice where container handling equipment is already in use and the need for bottom lifts arises. 9530 is the economic choice at a terminal with relatively few bottom lifts and a desire to create flexibility in a fleet of container handling machines by switching from machine to machine. PIGGYBACK LEGS SYSTEM The leg arrangement is done according to the ELME design which is a load clamping system that involves all four foldable piggyback legs in an automatic sequence. The feet are designed according to European standard and made of Strenx® 900E material (meets S 890 QL) to extend life time. Sensors (integrated in the feet) detect when the trailer is clamped and send signals to the indication system. To avoid unclamping, a signal is also sent as soon as the container/trailer is lifted off the ground. HYDRAULIC FUNCTIONS 9530 has two hydraulic functions; clamp/unclamp and fold/unfold of legs. The powerpack consists of a single motor and pump assembly to assure accurate flow and pressure. All functions are controlled through solenoid valves on the attachment. INSTALLATION, CONTROL AND PROTECTION SYSTEM Plug/socket connectors are used to hook up the attachment to the spreader. Since all controls need to be executed in the spreader PLC, it is recommended to use the attachment together with an ELME spreader. When the attachment is connected to the spreader, the spreader will be prevented from any telescoping and twistlock movements. Connectors from the attachment are plugged in the parent spreader. The spreader functions can then be used to control leg folding and clamping. Crane indicator lights advise the operator when the piggyback attachment is correctly seated, clamped or not clamped. The system ensures that the twistlocks connecting the spreader to the attachment cannot be opened inadvertentl

©September 2022 ELME Spreader AB Cabin side TECHNICAL SPECIFICATIONS Type of lifting system 4 100 kg without extra equipment Lifting capacity (SWL), piggyback** 41 tonnes ± 10 % eccentric load Lifting system Corner castings at 20ft position Legs clamping distance, min / max Legs clamping force Legs centre distance, min Hydraulics, operating pressure up to Hydraulics, flow / tank volume Power supply Electrical motors Surface preparation 9530 attached to ELME Spreader Model 8110. Piggyback foot, European standard. All specifications are subject to change without notice. A list of options...