878 WTP
2Pages

{{requestButtons}}

Catalog excerpts

878 WTP - 1

MODEL 878 WTP GANTRY MOUNTED INTERMODAL TOP LIFT SPREADER FOR LADEN CONTAINER HANDLING Standard supply includes: . Mounting arrangement to fit the gantry . Four pendular ISO twistlocks . Lifting eyes near twistlocks . Mechanical pile slope (MPS) . Hydraulic powered pile slope (PPS) via gantry . Hydraulic telescoping . Hydraulic slew and reach via connection to gantry . Hydraulic stops . Hydraulic leg folding . Hydraulic clamp and unclamp . Solenoid valves for all hydraulic functions . Four grapple legs with block stacking, foldable in an automatic sequence . Electrical and mechanical twistlock protection and indication system . Electric telescoping system protection . Electrical protection indication system for trailer handling . Lift interrupt signal . LED-indication lights . LED-work lights . WTP . North American trailer handling ELME Spreader Model 878 WTP is a container and trailer handling spreader for handling of laden ISO, WTP and US-domestic containers weighing up to 40 tonnes. 878 WTP is designed for use under a gantry at the front of a lift truck. The strong and basic concept offers distinct advantages, such as two parallel telescopic beams, assuring max overlap. The beam sections are dimensioned to absorb not only the vertical, but also the very considerable horizontal forces. TWISTLOCK SYSTEM The twistlock system is manufactured in a rugged design and is well-proven since many years. 878 WTP has hardened, pendulling ISO twistlocks, hydraulically activated with electrical and mechanical interlocking against faulty locking and unlocking. GANTRY MOUNTING WITH MECHANICAL PILE SLOPE Gantry mounting is used for lift trucks, dedicated to container handling only. Four telescopic hangers connect the spreader to the gantry. Gravity assures the level position of the spreader, with or without load. However, the hangers will allow the spreader to automatically adapt to containers on trailers or on uneven ground. GRAPPLE LEGS SYSTEM The leg arrangement is done according to the ELME patented system which is a load clamping system that involves all four foldable grapple legs in an automatic sequence. Thanks to this feature the spreader can be lowered between containers that are block stacked front to front and side to side. Integrated in each leg/ foot is a clamping sensor that signals to the driver that the trailer is ready to be lifted. The folding is sequential as standard but outside of the 30ft-position it is parallell for reduced folding/unfolding time. TELESCOPING, SLEW, REACH AND SIDESHIFT SYSTEM Telescoping is powered by one hydraulic cylinder inside each beam. The slew and reach motions are possible thanks to two hydraulic cylinders that connect the spreader to the gantry. By powering either one or both cylinders, the slew and reach functions are activated. A third cylinder between spreader and gantry provides the sideshift motion. WTP-SYSTEM The WTP option built into the spreader endbeams allows the operator to hydraulically change the twistlock positions to handle ISO and US-domestic containers as well as WTP containers. CONTROL AND PROTECTION SYSTEM Electrical systems monitor the state of the spreader at all times. Indicator lights advise the operator when the spreader is correctly seated, locked or not locked and in intermodal mode, clamped or not clamped. The signals are preconditions for the important protection functions of the spreader such as twistlock activation, telescoping, grapple legs and lift interrupt.

Open the catalog to page 1
878 WTP - 2

©April 2022 ELME Spreader AB TECHNICAL SPECIFICATIONS Type of application Gantry mounted Type of lifting system Four vertical twistlocks 13 000 kgs without extra equipment Lifting capacity (SWL), spreader 40 tonnes ± 10 % eccentric load Lifting capacity (SWL), piggy back 40 tonnes ± 10 % eccentric load Lifting capacity (SWL), lifting eyes Telescopic positions Mechanical pile slope (MPS) Power pile slope (PPS) Grapple leg foot, North American Standard. Legs clamping distance, min / max Legs centre distance, min / max Hydraulics, operating pressure up to Hydraulics, flow Electric - control...

Open the catalog to page 2

All ELME Spreader AB catalogs and brochures

  1. ELME Brochure

    15 Pages

  2. 8210 WTP

    2 Pages

  3. 8615

    2 Pages

  4. 8510

    2 Pages

  5. MODEL 953

    2 Pages

  6. 817 WTP

    2 Pages

  7. 818 WTP

    2 Pages

  8. 877 WTP

    2 Pages

  9. 857

    2 Pages

  10. 717

    2 Pages

  11. 816TL

    2 Pages

  12. 816

    2 Pages

  13. MODEL 817

    2 Pages

  14. 8610 NA WTP

    2 Pages

  15. 582LS

    2 Pages

  16. 582LT

    2 Pages

  17. 586TB

    2 Pages

  18. 588TB

    2 Pages

  19. 589TB

    2 Pages

  20. 815

    2 Pages

  21. 818

    2 Pages

  22. 817

    2 Pages

  23. 8915

    2 Pages

  24. 8315

    2 Pages

  25. 8310

    2 Pages

  26. 517

    2 Pages

  27. 508

    2 Pages

  28. 584LF

    2 Pages

  29. 584LD

    2 Pages

  30. 584LA

    2 Pages

  31. 8110E

    2 Pages

  32. 8215E

    2 Pages

  33. 8215

    2 Pages

  34. 8110

    2 Pages

  35. MODEL 8810

    2 Pages

  36. 952

    2 Pages