818 - 2 Pages

Add to MyNauticExpo favorites
818

Catalog excerpts

MODEL 818 GANTRY MOUNTED TOP LIFT SPREADER FOR LADEN CONTAINER HANDLING Standard supply includes: • Mounting arrangement to fit the gantry • Mechanical pile slope (MPS) ELME Spreader Model 818 is a telescopic top lift spreader for handling of laden ISO containers weighing up to 45 tonnes. 818 is designed for use under a gantry at the front of a lift truck. • Four vertical pendular ISO twistlocks • Lifting eyes near twistlocks • Hydraulic telescoping • Hydraulic slew and reach • Solenoid valves for all hydraulic functions • Electrical and mechanical twistlock protection and indication system • Electric telescoping protection system • Lift interrupt signal • LED-indication lights • LED-work lights The strong and basic concept offers distinct advantages, such as two parallel telescopic beams, assuring max overlap. Beam sections dimensioned to absorb not only the vertical, but also the very considerable horizontal forces. TWISTLOCK SYSTEM The twistlock system is manufactured in a rugged design and is well-proven since many years. 818 has hardened ISO quick exchange pendular twistlocks. Hydraulically activated and mechanical interlocking against faulty locking and unlocking. GANTRY MOUNTING WITH MECHANICAL PILE SLOPE Gantry mounting is used for lift trucks, dedicated to container handling only. The system increases the residual capacity of the truck when compared to fork mounting, and is the more economical solution. Four telescopic hangers connect the spreader to the gantry. Gravity assures the level position of the spreader, with or without load. However, the hangers will allow the spreader to automatically adapt to containers on trailers or on uneven ground. TELESCOPING, SLEW, REACH AND SIDESHIFT SYSTEM Telescoping is powered by one hydraulic cylinder inside each beam. The slew and reach motions are possible thanks to two hydraulic cylinders that connect the spreader to the gantry. By powering either one or both cylinders, the slew and reach functions are activated. A third cylinder between spreader and gantry provides the sideshift motion. CONTROL AND PROTECTION SYSTEM Electrical systems monitor the state of the spreader at all times. Indicator lights advise the operator when the spreader is correctly seated, locked or not locked. Each signal is a precondition for the important protection functions of the spreader. Such as twistlock activation, telescoping and lift interrupt. ELME™ Swedish Spreader Systems

 Open the catalog to page 1

©October 2016 ELME Spreader AB TECHNICAL SPECIFICATIONS Type of application Gantry mounted Type of lifting system Four vertical twistlocks 7 000 kgs without extra equipment Lifting capacity (SWL), spreader 45 tonnes ± 10 % eccentric load Lifting capacity (SWL), lifting eyes Telescopic positions Mechanical pile slope (MPS) Hydraulics, operating pressure up to Hydraulics, flow Electric - control voltage Paint thickness Gantry and hangers. * Calculated speed at 20° C All specifications are subject to change without notice. A list of options enables you to adapt the product more precisely to...

 Open the catalog to page 2

All ELME Spreader AB catalogs and brochures

  1. 817 INNOVATION

    2 Pages

  2. 582LS

    2 Pages

  3. 582LT

    2 Pages

  4. 586TB

    2 Pages

  5. 588TB

    2 Pages

  6. 589TB

    2 Pages

  7. 815

    2 Pages

  8. 817

    2 Pages

  9. 857

    2 Pages

  10. 8915

    2 Pages

  11. 8315

    2 Pages

  12. 8310

    2 Pages

  13. 517

    2 Pages

  14. 508

    2 Pages

  15. 584LF

    2 Pages

  16. 584LD

    2 Pages

  17. 584LB

    2 Pages

  18. 584LA

    2 Pages

  19. 8110E

    2 Pages

  20. 8215E

    2 Pages

  21. 8615

    2 Pages

  22. 8510

    2 Pages

  23. 8215

    2 Pages

  24. 8110

    2 Pages

  25. MODEL 8810

    2 Pages

  26. ELME Brochure

    16 Pages

  27. 952

    2 Pages

  28. 953

    2 Pages