See and be seen - increased safety with our Class B AIS Transceiver The easyTRX receives AIS radio signals, both class A (sent by commercial & larger crafts) and also Class B (sent by an increasing number of leisure crafts). The signals are converted into a NMEA message, which can be displayed on AIS enabled chart plotters or on P.C. software (Supplied). The easyTRX also transmits your yacht's own dynamic & static ship data, so you can be seen by other What else do I need to use the easyTRX? You need a dedicated GPS antenna which we can supply and either a VHF antenna or our special splitter - easySPLIT OCB - The easySPLIT OCB enables you to use your existing aerial. If you wish to program your ship static data (Name, length etc. etc.) or display received data on a P.C., your PC must be at least equipped with Windows XP with SP2 and a display resolution of Before transmitting you need your own ship's MMSI number, but you can receive AIS data until this is programmed in. Your dealer can supply you with a fully programmed easyTRX, ■ AIS Class B CS transceiver with latest Micro Processor technology ■ Fully certified through official authorities ■ Silent mode capable ■ (Push of one button* to receive only) ■ PC Software for configuration, but also to display AIS informa- ■ GPS & VHF combined antenna, part number A028 ■ GPS antenna dedicated to easyTRX, part number A029 ■ easySPLIT OCB, part number A027 AIS Transceiver with integrated GPS receiver (GPS antenna not 1 transmitter, 2 receivers (One receiver is changing between AIS Power consumption: 4 W in transfer mode Ambient conditions: splashproof according IP67, -25° C to 55° C Your local dealer: