Power-D-Box® with sockets pre-wired
6Pages

Power-D-Box with sockets pre-wired Front cutout for 30 positions, numbered 1 through 30 The compact 19“ Power-D-Box features aluminium profiled cross members with an anodised front plate. The panel cutout accommodates up to 30 positions numbered 1 to 30. Blanks cover unused positions, with 6, 12, 24 or 30 being ”open“. The rack can be fitted with plug-in type circuit breakers 3600/3900 and 2210, electronic circuit breakers ESS20 or electronic circuit protector ESX10 or E-T-A Solid State Remote Power Controllers (SSRPC) E-1048-600/700. Please specify the correct option according to the ordering information shown, as different depths as well as different heights of the front cut-out must be allowed for. The devices are plugged into sockets 63-P10-Si (6 positions each). These sockets (S1...S5) are provided with 6.3 mm blade terminals on the rear. Four busbars (X1...X4) with 6 (signalisation) or 15 (feed) positions each (6.3 mm blade terminals) provide easy terminal connection. Prewired options available ex factory are: • Parallel connected feed (2.5 mm2) with separate supply for each socket via busbars X1 and X2. Choice of wiring colours: black, red, blue, grey. Outputs are not connected. • Parallel connected auxiliary contacts (N/C) grouped per socket, 1 mm2, via busbars X3 (supply) and X4 (signalisation). Choice of wiring colours: black, red, blue, grey. • Series connected auxiliary contacts (N/O) of all positions with 1 mm2, via busbars X3 (feed) and X4 (signalisation). Choice of wiring colours: black, red, blue, grey. • Custom designed connection according to specification. Other fittings, e.g. back-up fuse, separate circuits or redundancy, multipole circuits, screw terminals, custom designed markings etc., are available to special order (please enquire). A compact printed circuit board with rear screw terminals is available as an alternative to the standard cable wiring. 19“ Power-D-Box length: 84 modules (426.72 mm) height: 2 U (88.90 mm) depth: 205...295 mm (depending on the selected version) material: aluminium, anodized 1 socket = 6 positions (No. 1 - 6) 2 sockets = 12 positions (No. 1 - 12) 3 sockets = 18 positions (No. 1 - 18) 4 sockets = 24 positions (No. 1 - 24) 5 sockets = 30 positions (No. 1 - 30) blanks cover unused sockets. Mounting socket polarised E-T-A mounting socket type 63-P10-Si (6 positions) rear blade terminals 6.3 mm max. load: 16 A continuous Busbars 15-way for 6.3 mm blade terminals Feed (X1, X2) max. current rating: 63 A Busbars 6-way for 6.3 mm blade terminals Auxiliary contacts (X3, X4) max. current rating: 32 A Feed busbar 50 A per socket (= 6 positions) HO7Z-K cables 2.5 mm2 with fully insulated 6.3 mm blade terminals to VBG 4 one cable per socket max. current rating: 20 A Auxiliary contact wiring HO7Z-K cables 1 mm2 with fully insulated 6.3 mm blade terminals to VBG 4 max. current rating: 4 A Wire colour option black, red, blue or grey Voltage rating AC 250 V/DC 65 V Housing ground/earth on the inside via M6 screw by means of ring cable lug (two with redundant systems)

Ordering information Type No. 19BGT 19“ Power-D-Box with sockets pre-wired Height Bottom view 19BGT-2-ESS20-30A0-B0 Prepared for circuit breaker types (supplied separately) 2210 for circuit breaker type 2210 3600 for circuit breaker type 3600/3900 1048 for SSRPC E-1048-600 ESS20 for electronic circuit breaker type ESS20 ESX10 for electronic circuit protector type ESX10 nn number of poles (special version) Feed prewired -- line entry supply auxiliary contacts signal ine feed pre-wired (2.5 mm2) 1-pole (or 1 circuit) R2 ine feed pre-wired 1-pole redundant ine feed pre-wired (2.5 mm2) 2-pole...

Power-D-Box with sockets pre-wired Internal connection diagrams 3600/3900 23 ESS20-003- … (group signalisation with change over) 5 status indicatio green / orange Control and Protection Electronic fault indication circuit control circuit current short circuit / measurement overload signal output electronic control unit load output electronic control unit status indication green / orange / red reset input reset output signal output load output

Power-D-Box with sockets pre-wired Termination 19BGT-2-2210/3600-30A0-B1 signal busbar X3 signal busbar X4 circuit breaker types 2210-S21x.../3600.../3900 plug-in type (not included) load terminal pin 1, blade terminals 6.3 mm auxiliary contact terminals: 11-12 make contact, blade terminals 6.3 mm auxiliary contact terminals: 23-24 break contact, blade terminals 6.3 mm pin assignment socket 63-P10-Si (per pole) line terminal X22150301 25 mm2, plug-in type (optional) pre-wiring of line feed, 1-pole protected, redundant line terminal X22150301 10...16 (25) mm2, plug-on type (optional)...

Blanking piece for Power-D-Box (types ESS20/ESX10) Y 308 563 41 Line Terminal (max. 63 A) X 221 503 01 max. tightening torque 3.0 Nm This is a metric design and millimeter dimensions take precedence ( ) All dimensions without tolerances are for reference only. In the interest of improved design, performance and cost effectiveness the right to make changes in these specifications without notice is reserved.Product markings may not be exactly as the ordering codes. Errors and omissions excepted.