Economy Power-D-Box®
4Pages

Description The Economy Power-D-Box® is a compact 2U power distribution system made of aluminium. PDB standard Power-D-Box® 19“ with interchangeable ETSI flange - 19“ ‘technical data on www.e-t-a.de material: aluminium Rated voltage DC 48 V; DC 65 V; DC 80 V Fire resistance (IEC 60695, Part 2-2) self-extinguishing Details of power distribution system: X8340-S02 Features • Plug-in type circuit breakers, 8340-F.10-P1...-H... , extendable in service, with or without auxiliary contact, load per way for SZ and/or S2 25 A (30 A upon request) for S4 20 A • Extremely compact design (installation depth 150 mm) • Standard redundant design (2 x 2, 2 x 4, 2 x 6, 2 x 8) • Group signalling for redundant line entry A and/or B is standard • To be used with industrially manufactured power distribution modules(X8340-S02/S04/SZ4) - protected against brush contact • Labelling strips for individual marking • Blank covers (bulk shipped) • Integral cable clamp rail • Load output connector for SZ and/or S2 protected against reverse polarity • Spring loaded terminals for S4 • Other versions are available upon request (e.g. with series fuse, separate circuits, single and redundant circuits, customer-specific marking etc) Load 25 A per position (30 A upon request) 132 A for complete unit Terminal design Supply feed (terminal block) screw-terminal 6...50 mm2, multistrand, supply 6...35 mm2 with wire end ferrule additional blade terminals DIN 46244-A6,3x0,8 Load (module) blade terminals 6.3x0.8 load output terminal protected against reverse polarity front Signalling (module) blade terminals DIN 46244-A4,8x0,8mm 80 A per module Terminal design Supply feed screw terminal supply 6...25 mm2 multistrand, 6...16 mm2 with wire end ferrule Load and signalling screw-less terminal 0.5...2.5 mm2, multistrand, with wire end ferrule, front X8340-SZ4 Load 25 A per position (30 A upon request) 150 A for the distribution system Terminal design Supply feed copper busbar 10 x 3 mm with hole 0 5.3 mm current supply from the rear side Loads blade terminals 6.3 x 0.8 mm, load output terminal protected against reverse polarity on front and rear side Signalling signalisation 6.3 x 0.8 mm plug-in direction as circuit breakers, opposite the main terminal side

Modular Economy Power-D-Box® Dimensions PDB-N-S2 power distribution system X8340-S04 Module for 4 circuit breakers ground bridge (optional) (N) + screw terminal ground stud (optional) load terminals load terminals module with circuit breaker E-T-A 8340-F… groundbridge (optional)

Modular Economy Power-D-Box® Dimensions PDB-N-SZ Accessories Load output terminal protected against reverse polarity (set: 4 moulded sleeves, 8 blade terminals 6.3 x 0.8 mm) X 222 847 01 for cable cross section 0.7...2.0 mm2 X 222 625 01 for cable cross section 2.5...4.0 mm2 X 222 848 01 for cable cross section 4.0...6.0 mm2 power distribution system X8340-SZ4 Schematic diagram PDB-N-SZ Blanking piece for Power-D-Box (circuit breaker types 8340, 8345) Y 308 563 11 19 .748 load terminals on front and rear side E-T-A circuit breaker type 8340-F… Module with power supply right -side For...