E-Plex 439DMAC
5Pages

439DMAC Series AC Power Distribution Module Introduction The E-Plex 439DMAC series has been designed to simplify electronic systems wiring by providing more control over AC loads. The module provides AC distribution and control for 110 and 220 single and split phase applications. Hydraulic magnetic circuit breakers provide traditional circuit protection. The 439DMAC supports a combination of single and double pole breakers. Manual override capabilities are provided through the use of a user defined default relay state with operation via traditional circuit breakers. The 439DMAC can be combined with the 336PFM or the 442EMS for a robust AC energy management solution. Key Features Design Specifications • 75 amp max power source per bus Per channel: 20A normally open • ibration: Tested to Lloyds Registered approval V vibration test 2 • 6 channels maximum 1 • ransient voltage suppression: EN6100-6-1 T • solation between high and low voltage systems I • Moisture resistance: IP50 • ndependent hydraulic magnetic circuit breakers I Single and double pole breakers available • PCB characteristics: UL94V-0 • Circuit breaker status monitoring • ser defined default relay state with operation U via traditional circuit breakers providing manual override capabilities • Operating Temperature: -20°C to 60°C • torage Temperature: -40°C to 85°C S • perating Humidity: 5% to 75% (non-condensing) O • LEN value 2 Powering systems - Empowering designers

439DMAC Series Front View - Physical Dimensions, Bus, Breaker and Relay Configuration Powering systems - Empowering designers

439DMAC Series E-Plex – E-Plex + Voltage + DC Supply Ground L1 In 1, 2, 4 L2 In 1, 2, 4 Rear View - Wiring, Bus, Breaker and Relay Configuration AC Power 110 - 250 VAC Fuse / Disconnect per ABYC / RVIA 75 Amp Max Per Bus 2,3 Load 1 2,3 2,3 Load 2 Load 9,10 2,3 2,3 2,3 Load 4 Load 11,12 2,3 Load 5 2,3 Neutral Bus Bar Load 3 2,3 Load 6 Load 13,14 2,3 Load 7 2,3 2,3 Load 15,16 Load 8 220V Applications 110V Applications NOTE: 1. Do not over tighten, not to exceed 20 inch/lbs of torque. 2. L1 / L2 load bus can be tied together or operated independently. 3. Common relay output are circuit...

439DMAC Series Connection Specifications Description Specifications AC Operating Voltage 120/240 VAC per bus AC Operating Current (per bus) 75A max DC Operating Voltage 10/32 VDC DC Operating Current 1.25A max Ordering Codes Description Part Number 439DMAC with crossed buss bars for split phase usage EP-AC-KIT-DMAC-439-C-01 439DMAC with straight buss bars for single phase usage EP-AC-KIT-DMAC-439-S-01 Optional Extras Description Part Number Black Anodised Aluminium Faceplate EP-AC-DMAC-439-PLATE Ensto Enclosure Machined to accept 439DMAC EP-AC-DMAC-439-ENCL Circuit Breaker Ordering...

Powering Systems - Empowering Designers George Summers Close, Medway City Estate, Rochester, Kent ME2 4EL tel: +44 (0)1634 778704 Fax: +44 (0)1634 290773 email: sales@e-plex.co web: www.e-plex.co Important Notice: E-Plex Ltd. (E-Plex) reserves the right to make changes to or discontinue any product or service identified in this publication without notice. E-Plex advises its customers to obtain the latest version of the relevant information to verify, before placing any orders, that the information being relied upon is current. E-Plex assumes no responsibility for infringement of patents or...