325QMM Series Quad Multi Module Introduction The E-Plex 325QMM series contains four channels up to five amps each. This allows the control of up to four different devices. These channels can be combined to handle larger amperage requirements if desired. The module also incorporates thermal, short circuit and programmable overload protection. With the ability to also include up to two dimmers, the module is capable of controlling lighting circuits without requiring additional modules. Note: External surge suppression is required when the module battery supply cable is longer then 50’ Key Features • 4 channel outputs capable to 5 amps each (20 amps total) • channels with PWM dimming capabilities 2 • hermal and overload protection T • nused outputs can be used as inputs U • rogrammable overload protection via E-Logic P • LEN value 3 Powering systems - Empowering designers

Powering Systems - Empowering Designers George Summers Close, Medway City Estate, Rochester, Kent ME2 4EL tel: +44 (0)1634 778704 Fax: +44 (0)1634 290773 email: [email protected] web: www.e-plex.co Important Notice: E-Plex Ltd. (E-Plex) reserves the right to make changes to or discontinue any product or service identified in this publication without notice. E-Plex advises its customers to obtain the latest version of the relevant information to verify, before placing any orders, that the information being relied upon is current. E-Plex assumes no responsibility for infringement of patents or rights...