*mynauticexpo

500CCM

Product catalog summary

Introduction
The E-Plex 500CCM series integrates master programming and control with a color touch screen interface, offering a comprehensive display and control solution for E-Plex systems. It supports dynamic and static graphics, ensuring a unique yet consistent interface. The 500CCM is compatible with existing E-Plex modules, enhancing system status and configuration capabilities.

Design Specifications

Shock Resistance: Non-operating half sine wave, 80G, 11ms, tested on all six faces.
Vibration: Complies with Lloyds test spec #1 section 12.
Moisture Resistance: Rated IP66.
PCB Characteristics: UL94V-0.
Salt Spray: Mil Std-202 compliant.

Key Features

Helm mountable with a 7” diagonal color LCD touch screen.
Screen resolution of 480 x 234 with 16-bit true color.
256KB onboard memory for configuration data.
Rear USB service port and customizable graphics via E-LOGIC® software.
Supports both landscape and portrait orientations.

Electrical Specifications

Operating Voltage: 9 VDC to 32 VDC.
Operating Current: 400 mA at 32VDC to 900 mA at 9VDC.
E-Plex Output Current: Up to 1.5 A.

Physical Specifications

LCD brightness of 350 cd/m² with a horizontal viewing angle of -60/60 and vertical angle of -30/60.
Operating temperature range from -20°C to 50°C and storage from -30°C to 85°C.
Weight: 680 grams.

Mounting Instructions
A rectangular hole of 9.75” x 4.32” must be cut for mounting. Ensure sufficient space for wiring, and do not exceed a torque of 10 in-lbs when tightening screws.

Wiring Specifications
Recommended wire specification for E-Plex twisted pair is 16 AWG, with options for general purpose and marine use.

Additional Modules
The document lists various modules compatible with the E-Plex system, including lighting control, inverter interfaces, AC power distribution, air conditioning control, engine monitoring, and more.

Ordering Information
The 500CCM series is identified by the part number 500CCM, with detailed dimensional diagrams provided for installation guidance.

Important Notice
E-Plex reserves the right to modify or discontinue products without notice and advises verifying information before placing orders.

Catalog excerpts

Electronic Control The E-Plex 500CCM series combines master programmer and controller functionality with a color touch screen interface, producing a singular, robust display and control solution for any E-Plex System. Dynamic touch screen graphics and static touch overlays give you the ability to provide a unique appearance while maintaining a constant interface. The 500CCM is compatible with existing E-Plex modules and provides advanced system status and configuration capabilities. Combining the 500CCM with other AC distribution, DC distribution, digital I/O, sensing, user interfaces and system interface modules allows you to configure a system to meet your specific • Helm mountable • 7" diagonal color LCD touch screen with transmissive display • 480 X 234 screen resolution, 16-bit true colo • 256KB of onboard memory including a master record of configuration data • Rear USB service port • Custom touch screen graphic design and layout created within E-LOGIC® software • Custom dynamic and static graphics provided via color touch screen and touch overlay areas • Landscape & Portrait Orientation Options Design Specifications • Shock: (non-operating) Half sine wave, 80G, 11 ms 3 times shock of each six faces • Vibration: Tested to Lloyds test spec #1 section 12 Powering systems - Empowering designers

Open the catalog to page 1

Electrical Specifications Physical Specifications Wiring Specifications Wiring Specifications A rectangular hole the size of the keep out area (labeled on the dimensional drawings) must be cut from mounting surface. The keep out area is 9.75" x 4.32". The depth of the module is approximately 1.325". Please allow sufficient room for all wires connected to the clock as well. Mounting Instructions Hand tighten mounting screws until snug, torque should not exceed 10 in-lbs. NOTE: 1. Unrestricted topology: Star, Tree, Daisy Chain configurations all valid. Powering systems - Empowering designers

Open the catalog to page 2

Typical Wiring Diagram 3. User must install fuse or breaker to protect the circuit, rated for 5 amps or less. 4. 1.5A max total forali 4 data connections Powering systems - Empowering designers

Open the catalog to page 3

500CCM Series BATTERY 325QMM, 366HMM, 422QMM & 436MMX : 4, 6 or 10 channel multi-modules for control of lighting, including dimming and user-defined “mood” lighting POWER INVERTER 400ECM, 450ECM & 500CCM : Electronic control modules (“clocks”) that function as the master controller and programmer of the entire E-Plex system 361SIM : Inverter interface for complete control over your inverter functions 345LCD, 350LCD & 452LCD : 5.7”, 10” & 12” color LCD touchscreen displays that allow the user to interface with the E-Plex system, including monitoring and control functionality and includes direct...

Open the catalog to page 5