- Catalogs
- Dueemme Sidol S.r.l.
- Polished welded rings
Polished welded rings
Polished welded rings
AISI 316 / A4 stainless steel is used for the polished welded rings, ensuring durability and resistance to corrosion, suitable for marine environments.
The document lists various sizes of polished welded rings, with diameters (D) ranging from 3 mm to 12 mm and inside diameters (d) from 15 mm to 70 mm. Each variant has specified indicative working loads and breaking loads, which are crucial for determining the suitability of the rings for specific applications. For example, a ring with a 10 mm diameter and 50 mm inside diameter has a working load of 300 kg and a breaking load of 1950 kg.
An illustrative drawing is provided to show the dimensions, with D representing the section diameter and d the inside diameter. It is noted that the drawing is not to scale and dimensions should be verified for each batch.
Working load and breaking load are distinct ratings provided for each ring size. These values are indicative and do not serve as lifting certification. Users must verify the service conditions for the selected variant to ensure safety and compliance.
Users are advised to compare geometry, openings, and mounting options across the listed variants and include installation requirements in their inquiries. It is important to confirm load capacities for sizes marked with a dash, as these require additional verification.
Catalog excerpts
DueemmeSidol TECHNICAL DATA SHEET Polished welded rings Polished welded rings for professional supply. Compare geometry, openings and mounting across the listed variants and include the installation requirements in your enquiry.Material AISI 316 / A4 Variants and dimensions - Polished welded rings Indicative catalogue working load (kg) Dueemme Sidol | www.dueemmesidol.it
Open the catalog to page 1
TECHNICAL DATA SHEET Rev. 2026-10-06 Technical drawing Dimensions in mm. Illustrative drawing, not to scale. Technical characteristics are indicative and may vary between batches; verify the requested variant.The updated sheet denotes inside diameter by d (L in the earlier catalogue). Listed loads come from the catalogue for documented combinations only. A dash means the load must be confirmed; no values have been inferred for additional sizes. D: section diameter; d: inside diameter Working load and breaking load are separate ratings. The values shown do not constitute lifting certification;...
Open the catalog to page 2All Dueemme Sidol S.r.l. catalogs and brochures
Deck fillers1 Page
- Single block
- Cleat
- Boat hinge
- Plain bearing block
- Stainless steel hinge
- Block with swivel
- Mooring cleat
- Block with becket
- Boat mooring cleat
- Flat mooring cleat
- Deck fill
- Nautical swivel
- Yacht hinge
- Threaded deck fill
- Stainless steel mooring cleat
- Block with shackle
- Round ring
- Sailboat ring
- Double mooring cleat
- Flat block