
PRODUCT DATASHEET • Without tension spring • Open metallic outer jacket • PTFE sealing lip without spring • Dynamic sealing of rotating shafts, independent of direction of rotation • Metallic outer jacket ensures tight and precise fit • Stiffening plate ensures increased rigidity • Only limited static sealing between sealing lip and shaft at standstill • Limited sealing of low-viscosity and gaseous media and in split housings • Additional gluing of the seal into the housing is recommended • Design without tension spring creates less friction, but also less sealing effect PRODUCT ADVANTAGES • High chemical resistance • Tight fit in installation space (interference fit) • High temperature resistant • Longest service life • Highest functional reliability • Suitable for dry running and deficient lubrication • Anti-adhesive (stick-slip-free behavior) • Chemical engineering • Rotary unions • Mechanical engineering APPLICATION LIMITS • Please follow the QR code or hyperlink to the technical manual to obtain further information and instructions.
Open the catalog to page 1PRODUCT DATASHEET • Please consult the material data sheet valid for the respective material for current information on approvals and certificates, as this information depends on the compound and cannot be listed exhaustively here. DESIGN GUIDELINE • Please observe the design guidelines provided in the technical manual. • Please follow the QR code or hyperlink to the technical manual to obtain further information and instructions. STORAGE ADVISE • No direct heat sources • No condensation in the storage room • No exposure to ozone or ionizing radiation • Recommendations based on the revision of...
Open the catalog to page 2PRODUCT DATASHEET Radial shaft seal Simmerring® B2PT Temperature range at the sealing lip [°C] The values given are based on a limited number of tests on standard test specimens (2 mm sample plates) from laboratory production. The data determined from finished parts may deviate from the above values depending on the manufacturing process and the part geometry. The information provided herein is based on laboratory tests and on data sources deemed reliable. It constitutes general, nonbinding guideline values and does not represent any guarantee of specific properties or suitability for a particular...
Open the catalog to page 33 Pages
3 Pages
3 Pages
2 Pages
4 Pages
3 Pages
3 Pages
3 Pages
3 Pages
3 Pages
3 Pages
3 Pages
2 Pages
1 Page