Artkon
2Pages

Aitkon is made by pressing and expanding a number of foam composite fibres to a suitable thickness. This unique process results in a material, which combines several important properties. The main strengths of Artkon: 1. Lightweight: the density of the material varies between 90 and 400 kg / m3 depending on thickness and/or application. 2. Many decorative possibilities: this panel can be easily bonded with any type of surface cover such as ocoumé plywood, laminate, melamine, veneer, upholstery, aluminium, marble, etc. 3. Direct surface-covering and edge-bonding: Artkon allows to cover and edge-bond directly. 4. Fire resistance: Artkon has special fire resist»i^xlWjfteristics 3hd T^w smoke development. 5. Good rigidity and stability: this panel has a good tensile strength and stands against both water and chemicals. 6. Machining possibilities: Artkon can be manufactured with standard tools. In addition Drumarkon is able to produce the board according to your exact wishes e.g. cut, (edge)-bond, drill, groove, post form, etc.

The standard sizes of the panels are 2500 x 1000 mm and 2440 x 1220 mm. Drumarkon can manufacture the panels in order to suit The thickness of the panels can vary between 2 The A rtkcn, thanks to its lightweight and its numerous decorative possibilities, is especially wdl adapted for the yacht interiors. It can be used in dffèrent applications such as walls, ceilings or 1. Artkon for walls: the wall panels can be easily installed with standard U top and bottom profiles and connected together in several ways. 2. Artkon for ceilings: the ceiling panels can be covered with e.g. melamine, The...