PRODUCTINSIGHTS CHEMISTRYINSIGHTS SYSTEM INSIGHTS SYSTEMCHART ADHESIVESELECTOR TECHNICALDATA MSDSResin MSDSHardener

PRODUCTINSIGHTS SAILKIT REPAIR KIT FOR SAILS Volume: 10 ml (0.2 fl oz) Dimensions: 25x8.3X2 cm Weight: 35 g Performance: 24x8 cm System: APMA SKU: DSKP, DSKR, DSKC and DSKS Clean and easy healing system, even in the harshest conditions 1 x Flexible 2K pack Net volume: 10ml 1 x Textile patch 25x9 cm Textile types: Nylon, Woven, fiber reinforced polyester, fiber monofilm 1 x Accessories KIT Flexible PP spatula, nitrile gloves and DrSails’ CLEANER 1 x Hang-on selfadhesive Euroholder for lineal 1 x Identification label PE water resistant

CHEMISTRYINSIGHTS ALL PURPOSEMARINE ADHESIVE 4^ High viscosity 0 Very flexible 0 Solvent-free 4^ Multi-material bonding 4i Fast Curing (10 min) 0 Unhang 0 Transparent 0 Underwater curing 0 Aging resistance APPLICATIONS 4^ Textile 4) Laminate PROPERTIES FAST FLEXIBLE STRUCTURAL UNDERWATER drsails.com | @drsails

CHEMISTRYINSIGHTS ALL PURPOSEMARINE ADHESIVE 4^ High viscosity 0 Very flexible 0 Solvent-free 4^ Multi-material bonding 4i Fast Curing (10 min) 0 Unhang 0 Transparent 0 Underwater curing 0 Aging resistance APPLICATIONS 4^ Textile 4) Laminate PROPERTIES FAST FLEXIBLE STRUCTURAL UNDERWATER drsails.com | @drsails

SYSTEM INSIGHTS ONE4ALLCURING PERFORMANCE Working Life (min) Tack Free Time (min) Full Cured Time (hours) Tensile Elongation (%) Hardness Shore A (ASTM 2204) Glass Transition Temperature (Tg), °C

ALL PURPOSE MARINE ADHESIVE

ALL THE INFO SHOWN REFERS TO STANDARD CHEMISTRY PRODUCTS AVAILABLE ON THE MARKET

□r saiLS“ TECHNICALDATA S1104 SYSTEM Range Chemical Type Appearance Odor Density (g/ml) @ 25eC Viscosity (cP) @ 259C Flash Point (TCC) (2C) Hardener Chemical Type Appearance Odor Density (g/ml) @ 25eC Viscosity (cP) @ 259C Flash Point (TCC) (2C) Mixture Information given in the Material Safety Data Sheet is drafted in accordance with COMMISSION REGULATION (EU) 2015/830 of 28 May 2015. See the Material Safety Data Sheet for details. PRODUCT DESCRIPTION GLOO S1104 is a two-component epoxy-based adhesive system. Room temperature curing 1: 1 mixing ratio system performing super flexible, non sagging,...

volume in the proportions specified in Properties of Uncured Material section. Mix vigorously approximately 15 seconds after uniform color is obtained. I.For maximum bond strength apply adhesive evenly to both surfaces to be joined. ing Technologies specifically disclaims all ranties expressed or implied, including ranties of merchantability or fitness for a ticular purpose, arising from sale or use of ing Technologies’ products. Sailing hnologies specifically disclaims any liability consequential or incidental damages of any i, including lost profits. reduce this working time. Contact pressure...

Page 1 of 10 Print date: 04/04/2019 SAFETY DATA SHEET (in accordance with Regulation (EU) 2015/830) APMA (Component A) Version: 1 Revision date: 04/04/2019 1.1 Product identifier. Product Name: APMA (component A) 1.2 Relevant identified uses of the mixture and uses advised against. Adhesive Uses advised against: Uses other than those recommended. 1.3 Details of the supplier of the safety data sheet. Company: Sailing Technologies, S.L. Address: C/ CALATRAVA N° 68, BAJOS 3 Province: BARCELONA E-mail: [email protected] 1.4 Emergency telephone number: +34 932 693 348 (Only available during office...

SAFETY DATA SHEET (in accordance with Regulation (EU) 2015/830) APMA (Component A) Version: 1 Revision date: 04/04/2019 EUH statements: EUH205 Contains epoxy constituents. May produce an allergic reaction. Contains: Polipropilenglicol alquilfenil-eter epoxy resin (number average molecular weight < 700),reaction product: bisphenol-A-(epichlorhydrin) Formaldehyde, oligomeric reaction products with 1-chloro-2,3-epoxypropane and phenol 2.3 Other hazards. In normal use conditions and in its original form, the product itself does not involve any other risk for health and the environment. SECTION 3:...

SAFETY DATA SHEET (in accordance with Regulation (EU) 2015/830) APMA (Component A) Version: 1 Revision date: 04/04/2019 Page 3 of 10 Print date: 04/04/2019 In case of doubt or when symptoms of feeling unwell persist, get medical attention. Never administer anything orally to persons who are unconscious. Inhalation. Take the victim into open air; keep them warm and calm. If breathing is irregular or stops, perform artificial respiration. Eye contact. Remove contact lenses, if present and if it is easy to do. Wash eyes with plenty of clean and cool water for at least 10 minutes while pulling eyelids...

SAFETY DATA SHEET (in accordance with Regulation (EU) 2015/830) APMA (Component A) Version: 1 Revision date: 04/04/2019 6.3 Methods and material for containment and cleaning up. Pick up the spill with non-combustible absorbent materials (soil, sand, vermiculite, diatomite, etc.). Pour the product and the absorbent in an appropriate container. The contaminated area should be immediately cleaned with an appropriate de-contaminator. Pour the decontaminator on the remains in an opened container and let it act various days until no further reaction is produced. 6.4 Reference to other sections. For...

Page 5 of 10 Print date: 04/04/2019 SAFETY DATA SHEET (in accordance with Regulation (EU) 2015/830) APMA (Component A) Version: 1 Revision date: 04/04/2019 Characteristics: CEN standards: Maintenance: Observations: Filter Type needed: Hand protection: «CE» marking, category III. The mask must have a wide field of vision and an anatomically designed form in order to be sealed and watertight. Should not be stored in places exposed to high temperatures and damp environments before use. Special attention should be paid to the state of the inhalation and exhalation valves in the face adaptor. Read...

SAFETY DATA SHEET (in accordance with Regulation (EU) 2015/830) APMA (Component A) Version: 1 Revision date: 04/04/2019 Upper Explosive Limit: N.A./N.A. Vapour pressure: < 0.0002 kPa Vapour density:N.A./N.A. Relative density:1.17 g/cm3 Solubility:N.A./N.A. Liposolubility: N.A./N.A. Hydrosolubility: Practically insoluble Partition coefficient (n-octanol/water): N.A./N.A. Auto-ignition temperature: N.A./N.A. Decomposition temperature: > 200 °C°C Viscosity: 25000-45000 Explosive properties: N.A./N.A. Oxidizing properties: N.A./N.A. N.A./N.A.= Not Available/Not Applicable due to the nature of the...