PRODUCTINSIGHTS CHEMISTRYINSIGHTS SYSTEM INSIGHTS SYSTEMCHART ADHESIVESELECTOR TECHNICALDATA MSDSResin MSDSHardener

PRODUCTINSIGHTS □r 25 SELF-APPLYING BICOMPONENT SYRINGE Volume: 25 ml (0.9 fl oz) Dimensions: 24x4,5x6 cm Weight: 70 g Performance: 0.1x1 m System: One4AII SKU: DS25 SELFIX syringe self-applying and self-mixing No need of an additional gun to apply the product 1 x Self-applying syringe Net volume: 25ml 2 x Mixing nozzles Double HELIX. Self-mixing 1 x Nozzles’ subjection Clip Compact presentation 1 x Label PE water resistant HELIX nozzles The nozzle has the minimum size that guarantees a 100% homogeneous mix and also minimizes product losses

Ians- CHEMISTRYINSIGHTS Two-component epoxy-based adhesive system. Room temperature curing 1:1 mixing ratio system performing flexible, UV resistant bondlines with high mechanical strength. The adhesive system is fast curing with satisfactory use in any environmental condition, even applied underwater. 4) High Viscosity 0 Self Leveling 0 Solvent-free Multi-material bonding 0 Aging resistance 0 Fast Curing (20 min) 0 Underwater curing {^ Flexible STRUCTURAL UNDERWATER

SYSTEM INSIGHTS ONE4ALL CURING PERFORMANCE Working Life (min) 20 Tack Free Time (min) 22 12 15 Full Cured Time (hours) 24 24 24 24 CURED MATERIAL Tensile Strength, Mpa @ 20 min Tensile Elongation (%) Hardness Shore A (ASTM 2204) 85 57 N/A 98 Glass Transition Temperature (Tg), °C

ALL PURPOSE MARINE ADHESIVE Electric conductivity Heat Resistance

ALL THE INFO SHOWN REFERS TO STANDARD CHEMISTRY PRODUCTS AVAILABLE ON THE MARKET

□r saiLS“ TECHNICALDATA ONE4ALL S1101 SYSTEM PRODUCT DESCRIPTION GLOO S1101 is a two-component fast and flexible epoxy based adhesive system capable to cure in the most extreme conditions, even underwater. Once mixed reaches high strength flexible bond to almost materials performing high strength. Last Review: JUN 2019 Curing Properties (Air/water @ 252C unless noted) Typical Value Working Life , minutes 8 Tack Free Time, minutes 22 Full Cured Time, hours 24 TYPICAL APPLICATIONS Ideal for bonding a full range of materials: metals, wood, composites, sailcloth, wetsuit, ceramic, concrete and plastics....

Information given in the Material Safety Data Sheet is drafted in accordance with COMMISSION REGULATION (EU) 2015/830 of 28 May 2015. See the Material Safety Data Sheet for details. Saline Fog Atmosphere Strength Test Procedure: ISO 9227 Substrate: Mylar® with Twaron® 1650 UV Exposure Atmosphere Strength Test Procedure: ISO 4892-3 Substrate: Mylar® with Twaron® 1650 Thermal degradation Test Procedure: MidPoint degradation: For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS) Regulatory Notice Directions for use I.For high strength structural bonds, removal...

S1101 SYSTEM Storage Product shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8° C to 28° C (46° F to 82° F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused product, do not return any material to its original container. Shelf life was guaranteed for 36 months in described conditions. Data Ranges The data contained herein may be reported as a typical value and/or range. Values are based on actual test data and are verified on a periodic basis. Note The data contained herein...

Page 1 of 10 Print date: 04/12/2017 SAFETY DATA SHEET (in accordance with Regulation (EU) 2015/830) Dr. Sails (Component A) Version: 15 Revision date: 28/11/2017 1.1 Product identifier. Product Name: Dr. Sails (component A) 1.2 Relevant identified uses of the mixture and uses advised against. Adhesive Uses advised against: Uses other than those recommended. 1.3 Details of the supplier of the safety data sheet. Company: Sailing Technologies, S.L. Address: C/ CALATRAVA N° 68, BAJOS 3 Province: BARCELONA E-mail: [email protected] 1.4 Emergency telephone number: +34 932 693 348 (Only available during...

SAFETY DATA SHEET (in accordance with Regulation (EU) 2015/830) Dr. Sails (Component A) Version: 15 Revision date: 28/11/2017 EUH statements: EUH205 Contains epoxy constituents. May produce an allergic reaction. Contains: Polipropilenglicol alquilfenil-eter epoxy resin (number average molecular weight < 700),reaction product: bisphenol-A-(epichlorhydrin) Formaldehyde, oligomeric reaction products with 1-chloro-2,3-epoxypropane and phenol 2.3 Other hazards. In normal use conditions and in its original form, the product itself does not involve any other risk for health and the environment. SECTION...

SAFETY DATA SHEET (in accordance with Regulation (EU) 2015/830) Dr. Sails (Component A) Version: 15 Revision date: 28/11/2017 Page 3 of 10 Print date: 04/12/2017 In case of doubt or when symptoms of feeling unwell persist, get medical attention. Never administer anything orally to persons who are unconscious. Inhalation. Take the victim into open air; keep them warm and calm. If breathing is irregular or stops, perform artificial respiration. Eye contact. Remove contact lenses, if present and if it is easy to do. Wash eyes with plenty of clean and cool water for at least 10 minutes while pulling...

SAFETY DATA SHEET (in accordance with Regulation (EU) 2015/830) Dr. Sails (Component A) Version: 15 Revision date: 28/11/2017 6.3 Methods and material for containment and cleaning up. Pick up the spill with non-combustible absorbent materials (soil, sand, vermiculite, diatomite, etc.). Pour the product and the absorbent in an appropriate container. The contaminated area should be immediately cleaned with an appropriate de-contaminator. Pour the decontaminator on the remains in an opened container and let it act various days until no further reaction is produced. 6.4 Reference to other sections....

Page 5 of 10 Print date: 04/12/2017 SAFETY DATA SHEET (in accordance with Regulation (EU) 2015/830) Dr. Sails (Component A) Version: 15 Revision date: 28/11/2017 Characteristics: CEN standards: Maintenance: Observations: Filter Type needed: Hand protection: «CE» marking, category III. The mask must have a wide field of vision and an anatomically designed form in order to be sealed and watertight. Should not be stored in places exposed to high temperatures and damp environments before use. Special attention should be paid to the state of the inhalation and exhalation valves in the face adaptor....