toolingmix

Product catalog summary

Overview: The document provides detailed information about the DOPAG Metering and Mixing System, specifically designed for handling pasty two-component media such as polyurethanes and epoxy resins. It highlights the system's features, benefits, technical specifications, and typical applications.

Specifications:

Pneumatic, oversized rams and follower plate mounted special gear pumps.
Dispensing system with a static mixer and metering computer.
Electronic adjustment capabilities for mixing ratio and output rate.
Jib for supporting the mixing system and hose.

Features and Benefits:

Gentle material feeding and lower material degradation due to optimized gear pump construction.
Continuous flow dispensing and simple operation.
Overpressure protection and solvent-free operation.
Economic and compact construction with electronically controlled flow rate and low working pressure.

Applications: The system is suitable for sealing, gluing, and rapid prototyping. It can also process microball filled materials.

Optional Features:

Dispensing system with a static steel mixer and extended jib.
Automatic mixing ratio monitoring with volume counter and static dynamic mixer.
Remote control capabilities.

Technical Data:

Flow rate: 0.7 to 5 l/min, depending on mixing ratio and viscosity.
Mixing ratio: 100:100 to 100:10 by volume.
Maximum working pressure: 50 bar, higher on demand.
Material supply: 80 or 200 l container size.
Viscosity range: 50,000 to 1,000,000 mPa s.
Power supply: 3 x 400 V / 50 Hz / 16 A.
Maximum air inlet pressure: 6 bar max.
Dimensions: 1000 x 1510 x 2700 mm (80 l) or 1650 x 1750 x 2700 mm (200 l).
Weight: 720 – 1050 kg, depending on configuration.

Company Information: Hilger u. Kern / Dopag Group is a leading manufacturer of metering and mixing systems for plural component polymers and single component media. The company has over 300 employees, 8 subsidiaries, and 24 distributors worldwide.

Catalog excerpts

Metering Technology DOPAG Metering and Mixing System Hilger u. Kern / Dopag Group

Open the catalog to page 1

TOOLING-MIX for pasty media The TOOLING-MIX has been specifically designed for handling pasty two component media, including polyurethanes and epoxy resins, as well as for successfully processing microball filled • lower material degradation than similar systems due to the optimised construction of the gear pumps • careful construction for gentle material feeding minimum maintenance required, due to just a single pump for each component Typical Applications Rapid Prototyping • Gentle material feeding • Lower material degradation due • Continuous flow dispensing • Simple operation • Over pressure...

Open the catalog to page 2

The components are fed and metered directly from the drums. The gear pumps are mounted directly onto the follower plates. Each gear pump is individually controlled and protected against over pressure. The TOOLING-MIX is controlled by a metering Technical Data Flow rate Mixing ratio Maximum working pressure Mixing system Material supply Viscosity range Material characteristics Power supply Maximum air inlet pressure Both components are then kept separate until they enter the static mixer where they are mixed After use, the static mixer is normally purged with oversized rams Gear pump follower...

Open the catalog to page 3

Hilger u. Kern / Dopag Group Germany Hilger u. Kern GmbH Industrietechnik Käfertaler Straße 253 68167 Mannheim Switzerland DOPAG Dosiertechnik und Pneumatik AG Langackerstrasse 25 6330 Cham The Hilger u. Kern / Dopag Group, with more than 300 employees, +49 621 3705-0 +49 621 3705-200 [email protected] www.hilger-kern.com +41 41 7855-757 +41 41 7855-700 [email protected] www.dopag.com polymers and single component media such as greases, oils and pastes. Vertriebsbüro Mitte 1 68167 Mannheim +49 171 8087282 [email protected] Denmark DOPAG SCAN ApS Roskilde +45 45 828090 [email protected] Vertriebsbüro...

Open the catalog to page 4

toolingmix

toolingmix

Catalog excerpts

All Dopag catalogs and brochures