eldomix 60X

Product catalog summary

Overview
The ELDO-MIX 603 is a solvent-free gear metering and mixing system designed by Hilger u. Kern / Dopag Group for handling low to medium viscosity multi-component media such as epoxy resins, polyurethanes, or silicones. It features a modular and flexible construction, allowing for variable mixing ratios and output rates, and can operate in either shot dispensing or continuous flow modes.

Specifications

Flow rate: 2 ml to 10 l/min, depending on mixing ratio and viscosity.
Mixing ratio: 100:100 to 100:2 by volume.
Maximum working pressure: 100 bar.
Viscosity range: 50 to 80,000 mPa s, extendable to 300,000 mPa s with drum pumps.
Power supply: 3 x 400 V / 50 Hz / 16 A.
Maximum air inlet pressure: 6 bar.
Dimensions: Complete system approx. 1,810 x 1,000 x 1,694 mm.
Weight: Approx. 600 kg.

Features and Benefits

Modular construction for high flexibility.
Material supply via drum pumps with individually positioned modules.
Static mixing system with a twin snuffer valve and disposable static mixer.
Protection against overpressure for each gear pump.
Metering computer for system control and monitoring.
Optional features include volume counter, mass flow meter, servo motor drive, heating, and bypass.

Applications

Coating
Sealing
Gluing
Encapsulating

Technical Data

Material supply modules with pressure vessels (12, 24, or 45 liters).
Static-dynamic mixing system with mixer element monitoring.
Dynamic mixing system available.
Control box and pressure vessel chassis mounted on castors.

Company Information
The Hilger u. Kern / Dopag Group is a leading manufacturer of metering and mixing systems for plural component polymers and single component media. With over 300 employees and 7 subsidiaries worldwide, the group has been developing machines, systems, and components for over 30 years to meet individual customer needs.

Catalog excerpts

Metering Technology DOPAG Metering and Mixing System for low to medium viscosity media ELDO-MIX 603 Hilger u. Kern / Dopag Group

Open the catalog to page 1

for low to medium viscosity media The ELDO-MIX 603 is a solvent free gear metering and mixing system, used to handle low to medium viscosity multi component media, such as epoxy resins, polyurethanes or silicones. Special configurations to process high viscosity media are also available. The modular construction of the system has been designed for the highest possible flexibility. Material supply is by drum pumps that are placed in material supply modules with castors that can be individually positioned. Typical Applications • Modular, flexible construction • Variable mixing ratio • Variable...

Open the catalog to page 2

Material supply modules with pressure vessels are used to supply the material into the three phase asyn- chronous motor driven gear pumps where they pre-selected ratio. Each gear pump is protected against over A metering computer is used to control and monitor The ELDO-MIX 603 is fitted with a static mixing system that includes a twin snuffer valve combined with a disposable static mixer. Should mixed material be allowed to cure in the mixer, it can be replaced simply and inexpensively thus avoiding a time consuming, expensive and environment damaging flushing cycle. Dispensing system Technical...

Open the catalog to page 3

Hilger u. Kern / Dopag Group ® Hilger u. Kern GmbH Industrietechnik DOPAG Dosiertechnik und Pneumatik AG Käfertaler Straße 253 68167 Mannheim Germany Langackerstrasse 25 6330 Cham Switzerland The Hilger u. Kern / Dopag group, with more than 300 employees and 7 subsidiaries, is one of the leading manufacturers of machines for metering +49 621 3705-0 +49 621 3705-200 +41 41 7855-757 +41 41 7855-700 [email protected] www.dopag.com Vertriebsbüro Mitte 1 68167 Mannheim +49 621 3705-284 [email protected] component media such as greases, oils and pastes. For more than 30 years the group has developed...

Open the catalog to page 4

eldomix 60X

eldomix 60X

Catalog excerpts

All Dopag catalogs and brochures