Dynamix

Dynamix

Dynamix

Product catalog summary
General Overview
The Hilger u. Kern / Dopag Group has developed a new dynamic mixer designed for optimal economic efficiency, process security, and maintenance friendliness. This mixer is particularly useful for processing multi-component materials with significant differences in component volumes, viscosities, short pot life, or low flow rates.
Technical Specifications
  • Flow rate: 20 - 900 cm³/min
  • Mixing ratio: 100:100 - 100:5
  • Viscosity ratio A to B: 100:2, min. < 20 mPa s
  • Volume mixing chamber: 2, 4, 6, 8, or 16 cm³
  • Internal diameter, valves: 1, 2, 4, or 6 mm
  • Drive: Pneumatic motor up to 4,000 rpm, Servo motor up to 3,000 rpm
  • Dimensions: approx. 174 x 300 x 367 mm
  • Weight: approx. 11 - 15 kg, depending on configuration
  • Air pressure: 6 bar
Mixing Process
The rotor speed is crucial for successful mixing, especially for high viscosity materials that require higher shear energy. Monitoring the temperature within the mixing chamber is essential to prevent a rise in material temperature, which shortens pot life. A liquid-cooled mixing chamber may be necessary for excessive heat generation.
Flushing and Maintenance
Dynamic mixers are flushed with a cleaning agent and compressed air, with the mixing elements rotating for optimal cleaning. Alternatively, flushing with one of the components is possible. The mixer is designed for easy maintenance with a compact construction and easily disassembled rotor.
Construction and Design
The mixer features a compact design with five different mixing chamber volumes. The rotor can be easily disassembled, and valve connections can be swiveled for optimal hose direction. The inlet valve configuration prevents mixed material from contacting rotor seals, enhancing protection and functional security.
Valves and Drive Options
The mixer can be fitted with different sizes of stainless steel inlet valves, with optional recirculation valves to maintain material motion and minimize failure risks. The drive can be powered by either pneumatic or compact servo motors.
Company Information
Hilger u. Kern / Dopag Group is a leading manufacturer of metering and mixing systems for plural component polymers and single component media. The company has over 300 employees, 8 subsidiaries, and 24 distributors worldwide.
See more

Catalog excerpts

Dynamix-1

Metering Technology dynam x Dynamic mixer Hilger u. Kern / Dopag Group

 Open the catalog to page 1
Dynamix-2

General The development of this new dynamic mixer by the Hilger u. Kern / Dopag Group has produced a product, which based on its performance data and constructional features offers the optimum in economic efficiency, process security and maintenance friendliness. Dynamic mixers are generally used to process multi component materials if Dynamic, economical... • there is a significant difference between the volumes of the different components to be mixed, as an example, a mixing ratio of 100:5 • the viscosities of the components to be mixed are very different • the mixed material has a very short...

 Open the catalog to page 2
Dynamix-3

Mixing process Successful mixing results are directly linked to the speed of the rotor. Experience shows that high viscosity materials require higher shear energy which can be achieved through a faster rotor speed. As a consequence, this action may warm up the processed material. In addition, the ambient temperature and the possibility of heat caused by the chemical reaction whilst mixing may also influence the temperature of the material. A rise in material temperature automatically leads to a shorter pot life. This is why the temperature within the mixing chamber needs to be monitored if a dynamic...

 Open the catalog to page 3
Dynamix-4

Construction The Hilger u. Kern / Dopag Group dynamic mixer is compact in construction and is available with 5 different mixing chamber volumes. The rotor situated in the mixing chamber can easily be disassembled. The valve connections can be swivelled so that the optimal hose direction can be chosen. The inlet valve of the A component has been positioned such that it is impossible for mixed material to come into contact with the rotor seals. This configuration not only increases the protection of the rotor seals but also increases the functional security of the dynamic mixer. Mixing chamber The...

 Open the catalog to page 4
Dynamix-5

...maintenance friendly

 Open the catalog to page 5
Dynamix-6

Hilger u. Kern / Dopag Group Germany Hilger u. Kern GmbH Industrietechnik Käfertaler Straße 253 68167 Mannheim Switzerland DOPAG Dosiertechnik und Pneumatik AG Langackerstrasse 25 6330 Cham The Hilger u. Kern / Dopag Group, with more than 300 employees, polymers and single component media such as greases, oils and pastes. Denmark DOPAG SCAN ApS Roskilde +45 45 828090 [email protected] Vertriebsbüro Nord 30880 Laatzen +49 171 8087290 [email protected] Vertriebsbüro Ost 99831 Creuzburg +49 171 8087303 [email protected] Vertriebsbüro Süd 86391 Stadtbergen +49 171 8087285 [email protected]...

 Open the catalog to page 6

All Dopag catalogs and brochures

  1. dynamicLine

    12  Pages

  2. silcomix

    8  Pages

  3. eldomix 101

    6  Pages

  4. gluemix

    6  Pages

  5. eldomix 603

    4  Pages

  6. compomix I

    6  Pages

  7. vectodis

    6  Pages

  8. ladomix G-SF

    6  Pages

  9. eldomix 00X

    4  Pages

  10. compomix

    8  Pages

  11. ceradis

    6  Pages

  12. toolingmix

    4  Pages

  13. eldomix 60X

    4  Pages

  14. eldomix 30X

    4  Pages

  15. eldomix 20X

    4  Pages

  16. eldomix 10X

    4  Pages

  17. modis

    6  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.