Suitcased Anchord Pendant Buoys
5Pages

SUITCASE ANCHOR PENDANT BUOYS Suitcase anchor pendant buoys are manufactured from resilient closed-cell unsinkable foam core around the inner central steelwork covered in protective polyurethane elastomer coating. Suitcase anchor pendant buoy has a rectangular shape with a lay-flat surface. This shape ensures the buoys can be safe storage and transported economically. The inner central steel frame has enough support branches to ensure the foam core cannot be move. The resilient closed cell polyethylene foam core guarantees selffendering and unsinkable even in case of damage. And self-colored polyurethane elastomer skin is resistant to abrasion and UV rays degradation. For the extreme operating environment. The reinforced nylon filament ensures polyurethane elastomer protective coating has higher tear strength. Offshore and remote mooring Temporary mooring in port, dock or harbour Additional mooring for large vessels Long term mooring for infrequently used vessels Inland waterways Navigation channels Un-skinable closed cell rigid foam core Polyurethane elastomer outer skin Polyester reinforced skin Self-fendering with high impact absorption Various end fitting options available Robust construction and low collision Various color for choose Customized size and shape available www.doowinmarine.com - sales@doowinmarine.com

Suitcase Anchor Pendant Buoys Specification www.doowinmarine.com - sales@doowinmarine.com

Doowin Marine Doowin Marine is professional manufacturer of ship launching airbags, pneumatic rubber fenders, foam filled fenders, inflatable pipe plugs, and offshore foam buoys. Doowin Marine is the leading manufacturer for ISO14409:2011 or CB/T 3795 rubber airbags/marine inflatable airbags. Marine rubber airbags, known as ship launching airbags or ship launching balloons can be used for ship launching and landing, heavy lifting, and marine salvage. Our floating fenders include pneumatic rubber fenders and foam filled fenders. Our Yokohama type pneumatic rubber fenders are produced and...

MATERIAL OF BUOYS AND FENDERS We design and manufacturer the offshore buoys, floating foam fenders and other buoyancies based on our knowledge in mechanical and composites. Our buoys and fenders are designed and manufactured based on following raw materials: n Foam Core of Surface Buoys and Fenders Tensile Elongation Compressive strength Strength at break (50% compression) 250 kPa This table shows a typical specification only. Tensile Strength This table shows a typical specification only. The skin of buoys and fenders can be reinforced with reinforcement nylon layer to add further strength...

STEEL FRAME FOAM CORE COATING PROCES www.doowinmarine.com - sales@doowinmarine.com