Heat Exchanger Solution Partner rime neai cxuiiciiiyers DongHwa Plate Heat Exchangers are used in the industrial, marine, food and dairy sectors. DongHwa works at high quality level, based on an experienced staff, with regards to both production and calculation of Plate Heat Exchangers. DongHwa can, with the help of specially developed computer programs, quickly calculate an optimal solution to any plate heat exchanger application, based on the customer's demands. The calculated Plate Heat Exchanger is documented for the customer on a well-arranged and easily read data list. Our company endeavor ceaselessly DongHwa Eniec Heat Exchanger Solutions

Plate Heat Exchangers Working Principle Port hole Fluid distribution side Gasket is attached to the heat plate which forms flow channel and acts seal up the fluid not to leak to the outside. The number of the heat plate is determined according to the amount of fluid, physical properties of fluid, the pressure drop and thermal condition. The covers prevent the plates bended from the difference of pressure. In the assembly of plate, the surface with gasket is directed to the fixed cover and each plate is hanged in opposite direction alternately. And two fluids cannot be mixed and separated by a...

Wide contact area The strength of the plate is excellent, compared with other companies' products with the point contact type, as the metal contact point has the surface contact feature when the plates are assembled. And the durability and corrosion resistance are greatly improved by minimizing deformation and stress concentration. Besides, the section of the gasket is designed and manufactured to have a pressure-resistant structure that enables the minimum contact area with the fluid, and thus to withstand a high pressure. Dead Zone Clip Gasket The gasket can be fixed tightly and quickly on...

Plate Heat Exchanger Technical Data Model Area of Plate m2 4.02 Plate Hole Dia. mm 485 Max.Conn.Dia mm 550 Dimension - A mm 1540 Dimension - B mm 4310 Dimension - C(±1.5%) mm t : Heat Plate Thickness ■ 10,000ton hydraulic press Max. operation temp. Heat transfer area Max. operation press. Max. flow rate The following materials can be applied to plates : SS304 and 316, Avesta 254SMO, Titanium, Ti-Pd, Nickel, Hastelloy-B & C276, Zirconium etc. The following materials can be applied to gaskets : NBR, EPDM, FPM, Neoprene, llR, Butyle, Silicone,Viton, Teflon Envelope (Special) www.dh.co.kr Head Office...