1. Catalogs
  2. DOLPHIN CHARGER
  3. ALL-IN-ONE (English version)

ALL-IN-ONE (English version)

ALL-IN-ONE (English version)

ALL-IN-ONE (English version)

Product catalog summary
Overview: The third generation of the ALL-IN-ONE concept integrates RCD protection, two 10 amps AC circuit breakers, and a smart 12 volts DOLPHIN PREMIUM battery charger into a single cabinet. This system is ideal for users needing a battery charger without an AC shore power system, offering a cost-effective solution compared to separate installations.
Specifications: The unit functions as both an AC consumer unit and a battery charger. It includes an RCD, a double pole main breaker, and two single pole breakers. The internal charger is available in 12 volts 25 amp or 40 amp versions with three isolated outputs, operating on 115/230 volts at 50/60 Hz. Eight charging programs are available, and safety features include overload, over temperature, reverse polarity, and short circuit protection.
Connections: The DC section uses industrial PHOENIX CONTACT connectors for cables up to 16mm², while the AC section uses WAGO WINSTA connectors. Recommended cable sizes are 6mm² for 25A and 10mm² for 40A for battery connections, and 3 x 2.5 mm² for AC connections.
Operating Modes: The system features various modes such as Charging, Balancing, and Floating, with LED indicators for status. Fault conditions like internal temperature faults and abnormal output voltage faults are indicated by red flashing LEDs.
Power Characteristics: The main power voltage is 230V with a frequency of 50-60Hz. The charger consumption is 2.5A for 25A models and 4.0A for 40A models. The auxiliary consumption is a maximum of 10A total for both outputs.
Environmental Conditions: The unit operates between -10°C to +55°C and can be stored between -20°C to +70°C. It supports a relative humidity of up to 90% without condensation and includes forced cooling with a thermostat-controlled fan.
Standards and Construction: The system complies with standards EN61000-6-1, EN61000-6-3, and EN60335. It is housed in a wall-mounted painted aluminum alloy case, with dimensions of 395 x 188 x 103 mm and a weight of less than 3 kg.
See more

Catalog excerpts

ALL-IN-ONE (English version)-1

NEW DOLPHIN PREMIUM «ALL IN ONE» AC DISTRIBUTION SYSTEM & BATTERY CHARGER This third generation of ALL-IN-ONE concept includes RCD protection, two 10 amps AC circuit breakers and a smart 12 volts DOLPHIN PREMIUM battery charger all in one cabinet. Ideal for those who require a battery charger but have no AC shorepower system it is more Cost Effective than installing a separate charger, RCD & Associated Cabling all in a compact and Attractive Casing. It is designed to be an AC consumer unit and battery charger in just one box it is simple to install and ensures AC safety. The internal charger is similar to either the 25 or 40A Dophin PREMIUM unit. Compact units but includes - RCD (Residual Current Circuit Breaker), Double Pole Main Breaker and 2 x single pole breakers (for ring main and say, immersion heater). MORE DETAILED INFORMATION ON www.dolphin-charger.com The battery charger is a DOLPHIN PREMIUM unit 12 volts 25 amp or 40 amp with 3 isolated output. It will operate with 115/230 volts 50/60 Hz. 8 charging programs are available in order to meet all customer needs. As on all DOLPHIN PREMIUM units safety feature such are overload, over temperature, reverse polarity, short circuit are standards. The DC and AC connectors have been carefully designed to meet the highest quality and safety standard. DC section includes industrial PHOENIX CONTACT 4 poles for cable up to 16mm² (maximum rating 76 amps). For AC section the unit includes WAGO WINSTA for 100% de safety. Dimensions: 395 x 188 x 103 mm / Weight : 3kg

 Open the catalog to page 1
ALL-IN-ONE (English version)-2

Code Main power characteristics Voltage SUBSYSTEM diagram Circuit Charger consumption Auxiliaries consumption Max. 10A total for both outputs Differential circuit breaker LED on front panel (yellow) 16A 30mA Charger fuse Main connector On/Off LED on front panel (yellow) Battery charger characteristics Main breaker Battery connector Charging programs Charge selector Voltage tolerance AC/DC Battery charger e. varies hours, initial By fuse, in the event of internal overheating, abnormal output voltage, output short-circuit or reverse polarity 3-colour LED on front panel Yellow : Boost mode Green...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.