MC-200(T)
1Pages

Catalog excerpts

MC-200(T) HEAD OFFICE, NORWAY Sound pressure levels at 1W/1m Specifications Material / Color Mounting Termination Weight w/transformer IP-rating Max. / min. amb. temp Rated / max. power SPL 1W/1m SPL rated power Effective freq. range Dispersion (-6dB) 1kHz / 4kHz Directivity factor, Q 1kHz Options Polyethylene/ RAL 7035 Bracket Screw terminal in termination chamber 17 Kg 54 90°C / -40°C 200 W / 300 W 100 dB 123 dB 60 – 20000 Hz 127° / 69° 2,8 Impedances, colors, labels Installation, Operation and Maintenance Procedures Unscrew lid, lead cable through cable gland and connect to terminal. Tighten cable gland and fasten termination chamber lid with a torque of 1-1,2 Nm to assure IP grade. Fasten the bracket to wall or ceiling. To change the position of the loudspeaker, please adjust the bracket (by loosening / tightening the screws) as required. For optimum performance, always use the correct voltage / power and operate within the frequency limits as stated. Do not open loudspeaker when energized. This loudspeaker is supplied with a 2 year warranty against defective workmanship. DNH reserves the right to alter specifications without notice T:\Dataark\DOC-format\CABINET\MC-200T.doc

Open the catalog to page 1