HP-6
1Pages

Catalog excerpts

HP-6 HEAD OFFICE, NORWAY All outside nuts and screws in stainless steel. Sound pressure levels at 1W/1m MP-6 Specifications Material / Color Mounting Termination Weight w/transformer IP-rating Max. / min. amb. temp Rated / max. power SPL 1W/1m SPL rated power Effective freq. range Dispersion (-6dB) 1kHz / 4kHz Directivity factor,Q 1kHz/4kHz Options Installation, Operation and Maintenance Procedures      Fasten bracket with 1-3 screws, to wall or ceiling. To change the position of the loudspeaker, please adjust the bracket (by loosening / tightening the screws) as required. HP-6 is delivered with cable and the cable should be terminated in a suitable junction box. For optimum performance, always use the correct voltage / power and operate within the frequency limits as stated. This loudspeaker is supplied with a two years warranty against defective materials and workmanship. DNH reserves the right to alter specifications without notice http://companyweb/teknisk

Open the catalog to page 1