DSP-15-54 (T)
1Pages

Catalog excerpts

DSP-15-54 (T) HEAD OFFICE, NORWAY Tested acc. To EN54-24 Type: B Manufactured by DNH A/S Kragerø, Norway Delivered with 1xM20 cable gland and 1xM20 blanking plug Horizontal / vertical coverage angles 1 1 1 1 Pink Pink Pink Pink noise noise noise noise Material / Color Mounting Termination Weight w/transformer IP-rating Max. / min. amb. temp Rated / max. power Ronfalin / RAL 7035 Bracket Screw terminals 1,8 kg Minimum 33 90C / -40C 15 W Maximum SPL at 15W/4M are the SPL values at 1W/4M increased with 11dB for every 1/3 octave pink noise level. Installation, Operation and Maintenance Procedures Remove lid by four screws, lead cable through the cable gland and connect to terminal. Select required tapping on the transformer. Screw lid back into place by four screws with a torque of 1,3 – 1,8 Nm to assure the IP rating. To change the position of the loudspeaker, please adjust the standard U- bracket (by loosening / tightening the screws) as required. DSP-15(T) can be supplied with three different bracket systems, according to customer requirements. For optimum performance, always use the correct voltage / power and operate within the frequency limits as stated. Do not open loudspeaker when energized. This loudspeaker is supplied with a two years warranty against defective workmanship. DNH reserves the right to alter specifications without notice T:\Dataark\EN-54-24\Dataark\DSP-15-54(T).doc

Open the catalog to page 1