CAS-6(T)
1Pages

{{requestButtons}}

Catalog excerpts

CAS-6(T) - 1

HEAD OFFICE. NORWAY Cable gland nominal tappin Sound pressure levels at lW/lm Installation, Operation and Maintenance Procedures ■ Termination side is marked with label. ■ Remove lid by 3 screws, lead cable through the cable gland and connect to terminal 70V (white - green) or 100V ■ Choose required power on the transformer. ■ Screw lid back into place by 3 screws with a torque of 1 - 2 Nm to assure the IP rating. ■ To mount, slide two M6 nuts in slot and fasten the swivel bracket with two bolts. Slide swivel bracket to wanted position and tighten bolts. ■ For optimum performance, always use the correct voltage / power and operate within the frequency limits as ■ Do not open loudspeaker when energized. ■ This loudspeaker is supplied with a 2 year warranty against defective workmanship. ■ Available with an aluminum swivel bracket. DNH reserves the right to alter specifications without notice ^ ^

Open the catalog to page 1

All DNH A/S Den Norske Høytalerfabrikk catalogs and brochures

  1. MC-50(T)

    1 Pages

  2. MD-300(T)

    1 Pages

  3. MD-120(T)

    1 Pages

  4. Aqua-30

    1 Pages

  5. A-45

    1 Pages

  6. HPS-6C(T)

    1 Pages

  7. HPS-6

    1 Pages

  8. HP-6C(T)

    1 Pages

  9. HP-6

    1 Pages

  10. CW-4(T)

    1 Pages

  11. BLC-550(T)

    1 Pages

  12. B-406(T)

    1 Pages

  13. BP-660(T)

    1 Pages

  14. B-650 (T)

    1 Pages

  15. MC-200(T)

    1 Pages

  16. MD-40(T)

    1 Pages

  17. VES-561(T)

    1 Pages

  18. BS-560(T)

    1 Pages

Archived catalogs