Engineering 2020
56Pages

{{requestButtons}}

Catalog excerpts

Engineering 2020 - 1

ISO 9001: 2015 REGISTERED QUALITY MANAGEMENT DESIGN - MANUFACTURE - SUPPLY

Open the catalog to page 1
Engineering 2020 - 2

THE COMPANY D.K. Holdings Limited has been manufacturing diamond tools and associated products since 1959. We have developed a unique expertise in producing and supplying diamond tools specifically for the glass industry. ISO 9001 QUALITY STANDARD Our products are made to the highest quality standards. We are accredited with the approved quality management system BS EN ISO 9001 : 2015 for manufacture and supply of our products. DIAMOND TOOLS Electroplated, electroformed, metal bonded and resin bonded diamond used on various materials because of very fast clean cutting, long life, versatility...

Open the catalog to page 2
Engineering 2020 - 3

DIAMOND & CBN SUPERABRASIVES The use of Superabrasives for cutting, grinding, drilling, profiling, reaming and polishing has become increasingly more important because of the tremendous benefits gained with quality, speed and cost saving of the final finished product. Diamond is pure carbon in a cubic crystal structure. It is the hardest of all known materials. Many applications benefit by the use of diamond in the Engineering Industry for cutting, drilling, profiling, grinding and polishing etc. because it enables faster operation, extended life of the tool and allows accurate tolerances...

Open the catalog to page 3
Engineering 2020 - 5

M Mandrels, D-Loc Microtouch Multi Point Dressing Tools N Needle Files (Electroplated) R (Cont'd) 14 11A9 Peripheral Cup Wheel 31 10 14A1 Optical Profile Wheel 39 14F1 Optical Profile Wheel 40 O OPG (Optical Profile Grinding) Wheels P - Q Peripheral Wheels Polycrystalline Tools Precision Profile Wheels Precision Reamers R RESIN DIAMOND & CBN INTRODUCTION Diamond CBN Metoid Polyimide RESIN BOND SUPERABRASIVE WHEELS 1A1 Peripheral Wheel 1A1R Peripheral Wheel 1A1W Internal Grinder 1A8W Internal Grinder 3A1 Optical Profile Wheel 4A2 Dish Wheel 4BT9 Dish Wheel 4ET9 Dish Wheel 6A2 Peripheral Cup...

Open the catalog to page 5
Engineering 2020 - 6

DK Holdings Limited manufacture and supply a very wide range of electroplated products which includes: Peripheral Wheels Precision Reamers (Direxpanders) Precision Profile Wheels Radius, Flat, ‘V’ Form, Special Forms, Cut-off Wheels Straight and Taper Cup Wheels Internal Grinding Wheels Routers Needle Files Sharpening Wheels/Discs and Saw Blades Drill Bits Flexible Diamond Products. REPLATING An extremely economical service is offered, subject to the body of the tool concerned being undamaged. Tools can be returned for strip and replating at a considerable cost reduction of the original tool...

Open the catalog to page 6
Engineering 2020 - 7

PRECISION PROFILE WHEELS DK Holdings Limited are world leaders in the manufacture of accurate diamond and CBN profile wheels for creep feed grinding. DK originally known as “Kendia” were the first diamond tool company to promote the concept of creep feed grinding using very accurately formed diamond wheels for the production of hard metal inserts. Wheels with diameters from 10mm to 500mm can be manufactured Prices and details available on request. tungsten carbide, ceramics, ferrites, glass, carbon, reinforced plastics and other nimonics. high speed and tools steels, etc. APPLICATIONS Carbide...

Open the catalog to page 7
Engineering 2020 - 8

lated diamond & cbn TEST CUTTING PROFILE WHEEL SHADOWGRAPH PROFILE INSPECTION COMPUTER CONTROLLED PROFILE INSPECTION COMPONENTS PRODUCED WITH DK WHEELS

Open the catalog to page 8
Engineering 2020 - 9

DIREXPANDER® Diamond and CBN precision reamers for very accurate bore finishing. The Direxpander® consists of a diamond coated helical sleeve mounted on a tapered mandrel which allows the final diameter of the tool to be adjusted to very fine limits. The combination of the sleeve and tapered mandrel produces a tool of great rigidity and the diamond coating ensures a consistent gauging over thousands of components. Over the last three decades the Direxpander® has become the definitive tool for sizing and straightening the bores of cast components eg Hydraulic Transfer Valves. During these...

Open the catalog to page 9
Engineering 2020 - 10

DIREXPANDER REAMERS

Open the catalog to page 10
Engineering 2020 - 11

1A1 PERIPHERAL WHEELS Electroplated diamond and CBN Peripheral Wheels are produced for use on Surface Grinding machines as well as Bench machines. These wheels are manufactured in both diamond and CBN. The diamond wheels are used for grinding Tungsten Carbide, Ceramics and CBN wheels are for grinding HSS and Steels harder than 40 Hrc. Benefits include: • No reduction to wheel diameter or loss of shape during use. • No need to dress wheel. • No dust generated through wheel breakdown. • Worn out wheels can be returned to DK to be re-plated giving cost savings over new wheels. When ordering...

Open the catalog to page 11
Engineering 2020 - 12

6A2/6A2C PLAIN CUP WHEELS Diamond and CBN electroplated Plain Cup Wheels are manufactured for use on Surface Grinding machines and Bench machines. These 6A2/6A2C cup wheels are can be produced in both diamond and CBN. The diamond wheels are used for grinding Tungsten Carbide, Ceramics and CBN wheels are for grinding HSS and Steels harder than 40 Hrc. Several benefits are available in using these types of wheels and include — • No reduction to wheel diameter or loss of shape during use. • No need to dress wheel. • No dust generated through wheel breakdown. • Worn out wheels can be re-plated...

Open the catalog to page 12
Engineering 2020 - 13

Electroplated diamond & cbn 11A2 TAPER CUP WHEELS Electroplated Taper Cup Wheels are manufactured for use on Surface Grinding machines as well as Bench machines. These wheels can be produced in both diamond and CBN. The diamond wheels are used for the grinding of Tungsten Carbide, Ceramics and CBN wheels for HSS and Steels harder than 40 Hrc. Benefits include: • No reduction to wheel diameter or loss of shape during use. • No need to dress wheel. • No dust generated through wheel breakdown. • Worn out wheels can be returned to DK to be re-plated giving cost savings over new wheels. When...

Open the catalog to page 13
Engineering 2020 - 14

Electroplated diamond & cbn INTERNAL GRINDING WHEELS Electroplated internal grinders are widely used on Jig and Internal Grinding Machines. They are widely used in the production of Dies, Punches and cutting tools. Available in standard sizes but specials are also readily available. Profiled internal grinders can also be manufactured. Other shapes & sizes available on request Please noteprices exclude carriage and VAT. CO www.dk-holdings.co.uk

Open the catalog to page 14

All DK Holdings catalogs and brochures

  1. Flooring 2020

    44 Pages

  2. Glass 2020

    56 Pages

  3. Flexible 2020

    45 Pages

  4. Stone 2020

    68 Pages